Precept 31UL Dinette Bed

[beegee1028]

Has anyone solved the mystery as to how the cushions are arranged to form a full length bed??

[Dave55]

On our 2016 31ul you flip the level under the table top and push table down until it rests on the bench supports. Then lay all cushions flat across the table
Top.

[beegee1028]

I have the table down but cannot figure out how the cushions are supposed to be arranged. See below.

[Jday7757]

Keep the bottom cushions on each side in place they way they are and then place the two "back" cushions in the middle (lengthwise just like the seat cushions). It's a tight fit and you will have to squeeze them and push them down, but it works.

[beegee1028]

We tried that but the cushions are so tightly squeezed that during the night they pop-up. I have a solution but JAYCO determined my solution would be 'custom' cushions and would cost me. Are you also finding that when siting in the Dinette, the clearence between the table & tummy is very tight? Not to industry standards but no satisfaction from JAYCO. I was able to obtain an additional seat cushion which fits perfectly and stores under the master bed.
Thanks to all that replied.
Delaware Bill
2017 PRECEPT 31UL
2015 JEEP Wrangler