Key element is getting gas to the frig. So when you first open the propane tank, light the stove, to purge the gas line. First time you light the frig, it might take a few tries as it needs to purge any "air" from the lines.
After that, it uses 12 volt dc power for the control board.
If you are connected to shore power, and the switch is set to auto, it will flip over to 120 volt electric mode, for the cooling process.
If you flip the frig to off mode, the gas solenoid closes, and it is off, until you flip the switch again. Honestly, I do not know why you must purge the gas line every time you turn the gas back on, if the system has not been used for a few weeks, but you need to.
New users usually struggle to get the frig to light because of the lack of gas in the line.
|