Weather Stripping Separating

[Barkie123]

On the rear of my coach, drivers side, the weather stripping has started to separate from the body. I fixed this last summer with some Lepage PL construction adhesive. I was able to then caulk it and repaint. It was hardly noticeable. After being parked for the winter I noticed that it has separated again. I can do the repair again but believe this is only a temporary fix.
I would really like to add a screw or two with a flat head but then how do I cover up that cosmetically?
Any suggestions?

[Vicr]

These: https://www.lowes.com/pd/Hillman-1-4...E&gclsrc=aw.ds

[muckinfuss]

Those may require the use of filister head screws ... so check that to avoid extra trips. Those are also available at ACE and True Value since they have, at least in my neck of the woods, had a far more extensive inventory of Hillman hardware items available in the store than either HD or Lowe's.

[Barkie123]

Thanks for the replies. I was thinking about using those caps but may try to glue one more time first once the warmer weather arrives. One of the other forums suggested using this.
https://www.canadiantire.ca/en/pdp/e...-0380004p.html
E6000 Glue. It being flexible, may work better for me. It's not a big issue just annoying.

[Vicr]

There's a Youtube channel called Project Farm and he does test on all kinds of stuff and he did an adhesive test/review so you can check that out as well.