19H Mod's to date

[29BHS ECO]

Screen door opener



Hat & coat rack at entrance



Under couch storage valance



Step at bed



1" trim around top of wardrobe for phones,key's etc

[29BHS ECO]

Hanging bath storage



Outdoor step



Front storage shelf



Exit window screen



Tool box mod

[dkkelly]

LIke the hat & coat rack at entrance as we have a similar wall which is empty. Have a 2012 x17z, but am not sure what is in the walls to be able to attach stuff or make mods. How did you attach the coat rack? Thanks

[Ladywendolyn]

Does the exit window not have a screen?

[29BHS ECO]

I used 3/4 " sheet rock screws. The wall material is very thin so I only plan on hanging hats & light jackets. You can judge the wall thickness buy checking the towel rack screw on the oppsite side of the wall.

[29BHS ECO]

ladywendolyn The Factory screen is for the bottom 5" crank out window. We installed a full screen, with velcro, for the entire " exit" window which we swing out and hold in place with a 12" pce of pvc pipe. Larry

[CruizinKim]

Originally Posted by 19H F250

ladywendolyn The Factory screen is for the bottom 5" crank out window. We installed a full screen, with velcro, for the entire " exit" window which we swing out and hold in place with a 12" pce of pvc pipe. Larry

That's a fantastic idea! I hate that I can't open the window. I have this fear of alarms going off if I try & open the window. Does the window stay hinged since it's meant as a fire exit?

[29BHS ECO]

cruzinkim-- Yes, the window is hinged from the top, so once you release the red handles you can carefully & eavenly pull the window out from the outside, then hold it open with something. We put a little hole in the screen, for the crank handle ,for the bottom window when the top is closed. We didn't install the screw to hold the crank in, so I used a little chain to keep it from being lost. Hope this helps Larry