Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-20-2016, 02:52 PM   #21
Senior Member
 
JPBeck's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 527
Nice job-- do you ever make videos?
__________________

Regards,
JP
2007 20BH Jayco JayFlight
2009 F150 5.4L SCrew Cab XLT
JPBeck is offline   Reply With Quote
Old 06-18-2016, 08:57 PM   #22
Member
 
Join Date: Jun 2016
Location: Edmonton,AB
Posts: 66
What is the difference between the HW30C and the EMS-HW30C surge protectors? I want to order mine tonight from amazon but can't really find out what the difference is other than about $150. Sorry,..It might be a stupid question but I have no idea.

Thanks!
__________________
2007 Chev 2500 Dmax (Mod heavy)
2015 Jayco 29.5BHDS (Going to be mod heavy)
Various other toys and ideas for more toys
Phatkd is offline   Reply With Quote
Old 04-12-2017, 04:28 PM   #23
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
Its been a while since I have done anything to the 5er, so over the last couple of days, I added some hinges to the panel below the fridge, so I have easier access and created some storage for cleaning supplies.




I also added power to the outside kitchen area. I know its not your typical hard wired setup, but it is impossible (for me anyway) to get power from the outlet behind the fridge to the outside kitchen, so my dad and I did some McGyvering to my setup.

I added a double gang box, using an old heavy duty extension cord, and a replacement male end to give me power outside.



I posted a question about adding support to the wall in the basement, and got some feedback, so I did this as well.





I was going to hinge the trap door, but decided velcro works perfect. Also, Force, my water pump was held down with 2 screws, barely, so I had to use 4 new screws, and fasten it down like it should have been.

Added support to under master bed.

__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 04-12-2017, 04:33 PM   #24
Senior Member
 
TxLoser's Avatar
 
Join Date: Feb 2017
Location: DFW
Posts: 2,223
Nice work.
__________________
2017 Eagle HT 26.5BHS Sold
2019 Eagle 321RSTS Sold
2024 Grand Design 310GK
2024 Chevy 3500HD DRW
TxLoser is offline   Reply With Quote
Old 04-18-2017, 09:57 AM   #25
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
A little more light was needed in the storage. I installed LED light strips under the storage. The photos show No lights on, 1 Stock light on, and then LED's on.



__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 04-18-2017, 11:56 AM   #26
Senior Member
 
Join Date: Oct 2015
Location: Milford
Posts: 629
Quote:
Originally Posted by spepi View Post
I also added power to the outside kitchen area. I know its not your typical hard wired setup, but it is impossible (for me anyway) to get power from the outlet behind the fridge to the outside kitchen, so my dad and I did some McGyvering to my setup.

I added a double gang box, using an old heavy duty extension cord, and a replacement male end to give me power outside.

That, sir, is absolutely fantastic!! I shall be copying that idea, post haste!

Did you put anything over the cord under the kitchen to prevent rub through, like a flex conduit or anything?
__________________
2016 Jayco Eagle HT 29.5BHDS (ordered 12/30/15, delivered 3/8/16)
2015 F-350 crew cab, short bed, 6.7L PSD, Pullrite Superglide 3300 hitch
Cdash is offline   Reply With Quote
Old 04-18-2017, 12:10 PM   #27
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
Thank you. I actually had to use a little wire clip under the 2 burner part, just to hold the wire from catching as I open and close. I used the same clips to hold the cord inside the cabinet behind fridge. The ones in the picture didnt hold as they were old, and the sticky wasnt that good.
__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 04-18-2017, 05:36 PM   #28
Senior Member
 
Join Date: Oct 2015
Location: Milford
Posts: 629
Now that your idea has me inspired, I have a question....

Do you think it would be feasible to cut in a box at the bottom of that wall, fish a wire from the outlet down to that hole, then go lateral into the sink area in order to avoid the exposed cord? I'd put in a shallow box and a solid cover.
__________________
2016 Jayco Eagle HT 29.5BHDS (ordered 12/30/15, delivered 3/8/16)
2015 F-350 crew cab, short bed, 6.7L PSD, Pullrite Superglide 3300 hitch
Cdash is offline   Reply With Quote
Old 04-18-2017, 07:37 PM   #29
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
There is a stud in the corner, and then there is actually 3 walls you need to get through in the side wall. So if you want to take the whole cabinet apart, which I started to, and then decided against it, you can try that route.
__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 04-18-2017, 07:52 PM   #30
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
Relocated the spare tire. Just need to get a cover for it, and a new USA Map.


__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 05-10-2017, 12:47 PM   #31
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
Yesterday, I added an 8" round convex mirror to a bracket my dad had, which I mounted on the Pin Box, so I can see my hitch in the bed when hooking up.


__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 05-10-2017, 03:20 PM   #32
Senior Member
 
Force's Avatar
 
Join Date: Feb 2016
Location: Rochester, MA
Posts: 491
How do you like that level? I almost bought the same one the other day but talked myself out of it.

EDIT: Nice job on these recent mods! I have adding a power outlet to the kitchen area on my to do list for sure.
__________________
Tom
2017 F250 Lariat Super Duty Crew Cab, 4x4, 6.7L Power Stroke
2016 Jayco Eagle HT 29.5 BHDS

Force is offline   Reply With Quote
Old 05-10-2017, 04:04 PM   #33
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
Quote:
Originally Posted by Force View Post
How do you like that level? I almost bought the same one the other day but talked myself out of it.

EDIT: Nice job on these recent mods! I have adding a power outlet to the kitchen area on my to do list for sure.
I dont think its possible to get perfectly level at any site, but it does get me close enough that when I fill the sink a little, the water is pretty good. I dont go too crazy, but I do know if I am off too much, and it rains, the bathroom slide leaks, because the tray under the slide, fills up and finds its way in. It only happened once last Columbus day we have torrential rains at Stateline CG at the Ct./RI state line.

I have something else I will post later, that I did today.
__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 05-11-2017, 04:29 AM   #34
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
Here is another addition. The outside kitchen lacks lighting, so I added an LED light strip with remote control to the area.


__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 05-11-2017, 12:13 PM   #35
Senior Member
 
Force's Avatar
 
Join Date: Feb 2016
Location: Rochester, MA
Posts: 491
That outside kitchen lighting is a fantastic solution. How is it powered though? Did you hard wire it to 12V DC, and if so where did you end up splicing it into?
__________________
Tom
2017 F250 Lariat Super Duty Crew Cab, 4x4, 6.7L Power Stroke
2016 Jayco Eagle HT 29.5 BHDS

Force is offline   Reply With Quote
Old 05-11-2017, 01:00 PM   #36
Senior Member
 
Vasquez Kid's Avatar
 
Join Date: May 2017
Location: Sweetwater
Posts: 731
Yeah you've got to be able to find your beer in the dark!

Seriously though very nicely done. Very even light patterns. How many and what size are the light strips?

I'm planning on a similar mod for the hall closet and the pantry in mine.
__________________
- Jeff


2017 Jay Flight 32BHDS
2006 GMC 2500HD Classic CC SB 4x4 6.6L Duramax/Allison
Vasquez Kid is offline   Reply With Quote
Old 05-11-2017, 01:52 PM   #37
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
I bought this https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

I used the existing plug in the back, and just used a new 6 outlet power strip, which I mounted to the inside left side, and plugged my fridge in as well as the power cord for the lights. It will only work on shore power I would guess. The 3M tape that is on the lights didnt stick real good, so I used some clear packing tape every 12" or so, just to hold it on.
__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 05-12-2017, 04:37 AM   #38
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
This is where I put the power strip. Also, I will be able to see my beer at night.


__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Old 05-12-2017, 06:51 AM   #39
Senior Member
 
oldenuftoknowbetter's Avatar
 
Join Date: Mar 2016
Location: Triad
Posts: 127
Quote:
Originally Posted by Paintinfool3 View Post
We used an upright paper towel holder and sit it up on the counter

x2
__________________
2016 Starcraft Launch Ultralite 26 BHS W/ProSeries WDH
2013 Ford F-150 Supercrew 5.0L W/factory tow package
oldenuftoknowbetter is offline   Reply With Quote
Old 05-14-2017, 03:42 PM   #40
Senior Member
 
spepi's Avatar
 
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
I got a delivery the other day. Hope to get these installed before Memorial Day.

__________________
2013 GMC Sierra 2500HD SLT
2016 Jayco Eagle HT 29.5 BHDS

My Mods Page
https://www.jaycoowners.com/forums/f...ods-35390.html
spepi is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 01:00 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.