Here's a few more pics of my drawer. I used heavy duty full extension drawer slides, the sides of the box are 1/2" plywood. The bottom is 1/4" plywood. the sides and bottom are held in place by small cleats to add reinforcement and something to nail to. I made wooden brackets to hold the slides inside the cabinet, screwed to the floor. If I did this again, I would attach the front end of the slides to the cabinet face frame. I thought about attaching the door to the cabinet, but the door is only 1/4" plywood and I would have had to screw through the door into the drawer, didn't want the screws to show.
|