On my 2017 Eagle HT 27.5RKDS, there is an access panel inside the pass-thru storage area (drivers side). This panel is held in place with 2 screws. Removing the panel allows you to get to the low-point drain valves for the hot water heater, the water pump and associated valves, and the back of the docking station. Whenever you might need in there, you have to use a square drive bit to remove the two screws. I don’t like the idea of having to locate and use tools to remove the panel so, I made the panel into a magnetic latched “door”.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
Good idea and a time saver, by the time you find that screwdriver go back to the panel then remove the screws ( righty tightly lefty Lucy) then reverse you could of had a beer.
Linear Mode
