Jayco RV Owners Forum

Thread Tools Display Modes
Old 08-06-2016, 11:45 AM   #1
Join Date: Jul 2016
Location: Marathon Twp
Posts: 32
Back Up Camera - How to Wire Eagle 339FLQS (Not Wireless)

Looking for ideas on a Back Up Camera for our Eagle 339FLQS. Prefer the hardwired versions of back up cameras. Looking ideas on routing the wires from the center of the back wall by upper clearance lights. There is a ladder to the left on the ODS. Prefer that no wires are left showing or as little as possible showing. Thank you for the ideas and help.

dcv is offline   Reply With Quote
Old 08-06-2016, 01:51 PM   #2
Senior Member
TxTwoSome's Avatar
Join Date: Nov 2015
Location: Kingwood, Texas
Posts: 295
I mounted my wired Camera above the center light on the back of camper.

I ran the wire straight up cut a small hole in the plastic screw cover at the top of trailer for wire.

Then ran it across and down the side all contained inside the plastic screw cover.

Except for about three inches at the corner where it runs diagonal to the side cover. Have to be looking for it to notice it.

Then just under the trailer mostly inside the existing wire looms.

Mounted the connector on the front of the Aluminum battery and stored excess wire inside battery box.
Bruce & Cindy
Rambo & Chuy (Chihuahua's)
2016 Jayco 23RLSW
Blue Ox Sway Pro
2014 Ram 1500 5.7 Hemi
TxTwoSome is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 10:19 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.