Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-24-2015, 03:43 PM   #1
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Changed out my batteries

Switched to 6v and added an inverter.
Attached Thumbnails
rvbatt.jpg  
PlayersZ28 is offline   Reply With Quote
Old 11-25-2015, 09:03 AM   #2
Senior Member
 
Seann45's Avatar
 
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,714
Good going
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days boondockinig in2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12

Seann45 is offline   Reply With Quote
Old 11-25-2015, 09:05 AM   #3
Senior Member
 
mike837go's Avatar
 
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
Quote:
Originally Posted by PlayersZ28 View Post
Switched to 6v and added an inverter.
Silly question:

How do you get 120VAC from the inverter to the places where it'll be useful without powering up the converter/charger?
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck


Sitting in The Cheap Seats.
And proud of it!
mike837go is offline   Reply With Quote
Old 11-25-2015, 09:18 AM   #4
Site Team
 
Mustang65's Avatar
 
Join Date: Nov 2012
Location: Clearwater, FL area
Posts: 5,196
Nice Job!!!

What's next? Love to hear about projects...

Don
__________________
2013 Jayco Eagle 284BHS
2012 Ford F150XLT, EcoBoost w/3.73,Max Tow Pkg.
Our Solar Album https://www.jaycoowners.com/album.php?albumid=329
Mustang65 is offline   Reply With Quote
Old 11-26-2015, 07:08 AM   #5
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Quote:
Originally Posted by mike837go View Post
Silly question:

How do you get 120VAC from the inverter to the places where it'll be useful without powering up the converter/charger?
Not sure what you mean.

The inverter supplies 120v to the trailer thru the xfer switch. The yellow cord in the pic is hooked up to the gen-prep connection. If I'm on a generator I can either unplug the cord from the inverter or use the shore pwr cord to pwr the trailer off the genny (2000w portable). If I'm using the inverter I have to turn off the breaker for the conv/chgr. I figured out the remote jack on the Xantrex so rather than buying their remote kit I pulled and RJ11 phone extension cord up to the switch panel. When my lighted momentary switch arrives from Malaysia I'll install that in the inside switch panel to turn the inverter on/off. With the inverter on if I disconnect the shore cord the xfer switches to the inverter 120v.

The conv/chgr is for 12v to the trailer and battery charging and needs shore pwr. If I'm dry camping the batteries supply 12v to the trailer and the inverter supplies 120v.

Let me know if this doesn't answer the question.
PlayersZ28 is offline   Reply With Quote
Old 11-26-2015, 07:14 AM   #6
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Quote:
Originally Posted by Mustang65 View Post
Nice Job!!!

What's next? Love to hear about projects...

Don
If we like dry camping (1st time will be our 3month trip this winter) then next year is solar. Already looked and I can get the feed from the roof down beside the vent stack. I'll probably also gut the tin box out of the front bay to give me extra room for equipment then too. The back plywood you see in the pic is screwed to the frame rail as the front bay backer was galv metal.

I built a plywood box for the batteries and there is a +shaped piece to keep them apart. I used the two straps that held the OE batteries in place and cut them in half and sewed loops in them so I could fix them to the top of the batt box and hold the batteries down. I went with AGM's so I didn't need to worry about venting.

Also looking into battery monitoring. I ordered some components and am going to take a crack at developing a custom solution with a micro-controller board. Maybe with display to Android phone.
PlayersZ28 is offline   Reply With Quote
Old 11-26-2015, 05:34 PM   #7
Site Team
 
Mustang65's Avatar
 
Join Date: Nov 2012
Location: Clearwater, FL area
Posts: 5,196
Quote:
Originally Posted by PlayersZ28 View Post

Also looking into battery monitoring. I ordered some components and am going to take a crack at developing a custom solution with a micro-controller board. Maybe with display to Android phone.
Nice plans.

I went with the Arduino doing the monitoring (battery and AV voltage/Amps, temp, fresh and black water tank levels, and sends the information to a Raspberry Pi2 so that I can monitor it on the Tv (HDMI) and the Smartphones/Tablets (Webpage) also. A lot of bugs to work out of the scripts, but is coming along slowly (VERY SLOWLY). I have 5 different OpAmps that I am working with to monitor the shunt's MilVolts, each one has its issues... I will get the right on yet. I still need to get the serial data out of the Moringstar MPPT SOLAR controller.. not enough time in the day.

Good Luck,

Don
__________________
2013 Jayco Eagle 284BHS
2012 Ford F150XLT, EcoBoost w/3.73,Max Tow Pkg.
Our Solar Album https://www.jaycoowners.com/album.php?albumid=329
Mustang65 is offline   Reply With Quote
Old 11-26-2015, 09:02 PM   #8
Senior Member
 
RoyBraddy's Avatar
 
Join Date: Sep 2011
Location: King George
Posts: 2,761
I was going to do some absolute DC VOLTAGE and DC CURRENT monitoring but in the end I ended up just guessing about the CHARGE STATE of battery bank to some degree...

I have dual DC VOLMETERs monitoring both battery groups in my switchable battery bank and then a DC CURRENT Monitor at the feed point of the battery switches...

When my DC VOLTMETERs read 12.6-7VDC when resting I can say they are close to being fully charged.

When the DC VOLTMETERS drop down to 12.0VDC when resting I can say the battery bank is approximately at its 50% charge state and this is when I stop using my batteries until I get them them charged back up to their 90% charge state in a three hour run time using smart mode charging.

The DC CURRENT meter just tells me how much DC current is being pulled from the batteries when camping OFF-ROAD and will also tell me how much the battery bank is demanding when I am charging the battery bank running my OFF-ROAD trailer off my 2KW Generator powering up my PD9260C Converter/Charger.

Been doing this since 2009 and my original batteries are still performing well... They are just now starting to fall off on performance as shown on the DC VOLTMETERs getting to the 12.0VDC level somewhat quicker then before when the batteries were newer.

My goal of course was to have my battery bank do all the things we wanted to do in a one day/night run off the batteries and make it until 8AM the next morning when I was allowed to run my generator at most camp ground areas we camp at...

When we are back at the trailer in the early evening from 6PM to 11PM we usually see as much as 20-22 AMPS DC Current being drawn from the battery bank running our things. The rest of times the DC Current meter show around 1-2 AMPs DC Current showing my parasitic drains... My three meter panel is mounted inside the POPUP trailer is a good place to be easily seen.

Roy Ken
__________________
Roy and Carolyn
I claim Horse Creek Country in Southern Ill - Momabear is from North Texas
We live in King George VA
RETIRED DOD DOAF DON CONTRACTOR Electronics Tech 42YRS

"We're burning daylight" - John Wayne
2008 STARCRAFT 14RT OFF-ROAD POPUP with PD9260C and three 85AH 12VDC batteries
2010 F150 FX4 5.4 GAS with 3.73 gears - Super Cab - Towing Package - 2KW Honda EU2000i Gen
K9PHT (since 1957) 146.52Mhz
"We always have a PLAN B"
RoyBraddy is offline   Reply With Quote
Old 11-27-2015, 07:14 AM   #9
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Quote:
Originally Posted by Mustang65 View Post
Nice plans.

I went with the Arduino doing the monitoring (battery and AV voltage/Amps, temp, fresh and black water tank levels, and sends the information to a Raspberry Pi2 so that I can monitor it on the Tv (HDMI) and the Smartphones/Tablets (Webpage) also. A lot of bugs to work out of the scripts, but is coming along slowly (VERY SLOWLY). I have 5 different OpAmps that I am working with to monitor the shunt's MilVolts, each one has its issues... I will get the right on yet. I still need to get the serial data out of the Moringstar MPPT SOLAR controller.. not enough time in the day.

Good Luck,

Don
What are you using for your Amps sensing? I have a 500A/50mv shunt and some INA226's on the way so I'll see what I can do with those. Looking to replicate what a Trimetric or other battery monitor does but with extra functionality.

Do you have a thread or anything posted about your setup?
PlayersZ28 is offline   Reply With Quote
Old 11-27-2015, 07:17 AM   #10
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Quote:
Originally Posted by RoyBraddy View Post
I was going to do some absolute DC VOLTAGE and DC CURRENT monitoring but in the end I ended up just guessing about the CHARGE STATE of battery bank to some degree...

I have dual DC VOLMETERs monitoring both battery groups in my switchable battery bank and then a DC CURRENT Monitor at the feed point of the battery switches...

When my DC VOLTMETERs read 12.6-7VDC when resting I can say they are close to being fully charged.

When the DC VOLTMETERS drop down to 12.0VDC when resting I can say the battery bank is approximately at its 50% charge state and this is when I stop using my batteries until I get them them charged back up to their 90% charge state in a three hour run time using smart mode charging.

The DC CURRENT meter just tells me how much DC current is being pulled from the batteries when camping OFF-ROAD and will also tell me how much the battery bank is demanding when I am charging the battery bank running my OFF-ROAD trailer off my 2KW Generator powering up my PD9260C Converter/Charger.

Been doing this since 2009 and my original batteries are still performing well... They are just now starting to fall off on performance as shown on the DC VOLTMETERs getting to the 12.0VDC level somewhat quicker then before when the batteries were newer.

My goal of course was to have my battery bank do all the things we wanted to do in a one day/night run off the batteries and make it until 8AM the next morning when I was allowed to run my generator at most camp ground areas we camp at...

When we are back at the trailer in the early evening from 6PM to 11PM we usually see as much as 20-22 AMPS DC Current being drawn from the battery bank running our things. The rest of times the DC Current meter show around 1-2 AMPs DC Current showing my parasitic drains... My three meter panel is mounted inside the POPUP trailer is a good place to be easily seen.

Roy Ken
Sounds like a pretty good setup. I want to be able to measure Amps in/out of the battery bank and also retain some historical data so that I can see if I can calculate % remaining/charged for the batteries.
PlayersZ28 is offline   Reply With Quote
Old 12-19-2015, 12:59 PM   #11
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Installed the 500A/50mv shunt today. I didn't really plan for it when I installed the batteries so it was kinda kluged into place. I was also out of 0-gauge connectors so I had to make up a bus bar with two pieces of flattened 1/2" copper pipe. Still need to put a connector into the shunt sensor lines so it's easier to remove the board for s/w dev in the house rather than sitting outside in sub-zero weather with a notebook.

The main board is a TI CC3200 with WiFi. Here's a pic of what it looks like right now.




And a screen shot of the output that I can view in a browser.

PlayersZ28 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 04:43 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.