|
10-06-2015, 04:24 PM
|
#1
|
Junior Member
Join Date: Oct 2015
Location: Grand Rapids
Posts: 13
|
Covers for camper switches
So I've upgraded from a pop up to a hybrid camper. That being said my kids love pushing all the buttons when they walk in the door. I'm looking to install a plastic cover that will cover the switches for the slide out and the water pump and water heater gas and electric. Any suggestions appreciated.
|
|
|
10-06-2015, 04:29 PM
|
#2
|
Senior Member
Join Date: Nov 2013
Location: north az
Posts: 305
|
Most hardware type stores have clear plastic covers that will lock up a thermostat that mounts on your wall in the house!
|
|
|
10-06-2015, 05:02 PM
|
#3
|
Junior Member
Join Date: Oct 2015
Location: Grand Rapids
Posts: 13
|
Thanks, that's what I was thinking to, just couldn't remember what they were called. I think I found one that should cover all the switches by the door.
__________________
2006 Jay feather X23B EXP
2006 Dodge Ram Hemi 1500 quad cab
|
|
|
10-06-2015, 05:09 PM
|
#4
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,844
|
I have seen a small shallow box attached over the switches with a hinged door.
You could make it a message board and put a latch on it for the crumb crunchers fingers.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
11-20-2015, 01:54 PM
|
#5
|
Member
Join Date: Oct 2015
Location: Harford County, MD
Posts: 48
|
Here's what I did to cover the bedroom slide switch. Jayco decided best location is right beside the light switch and closest to the door. Of course the first thing you touch. Small bubble pack wall hooks were in.
|
|
|
11-20-2015, 02:05 PM
|
#6
|
Senior Member
Join Date: Aug 2015
Location: Cumming, Georgia
Posts: 144
|
My dads cover growing up was a belt...worked well
__________________
------------------------------------------
2015 Jayco Eagle Premier 318RETS
2008 Ford F-250 Lariat CC Super Duty 6.4 Turbo Diesel
Cumming, Georgia
Go Dawgs!
|
|
|
11-20-2015, 02:05 PM
|
#7
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Jayco cheated on the 19RD. Behind a door, 5' off the floor!
Controls for the awning, water pump and heater. Level gauges. Porch light, light string that runs the length of the trailer and the lights over the kitchen sink. Where nobody under 5'6" can see them.
And if you don't know to open the cabinet....
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
11-20-2015, 03:49 PM
|
#8
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,844
|
But its away from little fingers!
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
11-20-2015, 05:12 PM
|
#9
|
Senior Member
Join Date: Oct 2014
Location: Somewhere
Posts: 305
|
I wish at least the light switches were inside the back door on our 23RB. For us elders with bifocals it's unhandy to see which switch goes to what. Eventually I'll remember but for now it's kind of unhandy!
|
|
|
11-20-2015, 06:03 PM
|
#10
|
Senior Member
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 1,958
|
Our older 19H has a key holder/message board with a hinge lid over the switch center. This is not on the newer models. Wish I could post a pic, but unit in winter storage. Bet you could buy something similar at Wally World or similar and just cut the back out of it.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
|
|
|
11-20-2015, 07:42 PM
|
#11
|
Senior Member
Join Date: Aug 2013
Location: Missoula, Montana
Posts: 704
|
But even still...
Quote:
Originally Posted by mike837go
Jayco cheated on the 19RD. Behind a door, 5' off the floor!
Controls for the awning, water pump and heater. Level gauges. Porch light, light string that runs the length of the trailer and the lights over the kitchen sink. Where nobody under 5'6" can see them.
And if you don't know to open the cabinet....
|
My bride often will look out the door to watch the awning extend and start the livingroom slide instead. What a shock when reading on the sofa and you get a ride. I hung a piece of paper over the slide switch to "try" and prevent this.
__________________
"I might be movin' to Montana soon..."
2020 Outdoors RV Glacier Peak Titanium
2013 Eagle 29.5RKS (traded in)
2013 Ford 6.7L diesel F350
|
|
|
11-20-2015, 08:52 PM
|
#12
|
Senior Member
Join Date: Mar 2015
Location: Bartonville
Posts: 513
|
Quote:
Originally Posted by mike837go
Jayco cheated on the 19RD. Behind a door, 5' off the floor!
Controls for the awning, water pump and heater. Level gauges. Porch light, light string that runs the length of the trailer and the lights over the kitchen sink. Where nobody under 5'6" can see them.
And if you don't know to open the cabinet....
|
Just like my 32RLDS. Both slide switches, awning switch, awning light strip, kitchen sink light, main room lights, pump, HW heater elec and gas, and the tanks/battery monitor all there, just inside the door. I kind of like them there, all in one place.
__________________
Scoutr2 (Mike)
2015 Jay Flight 32RLDS Elite
2012 Chevy 2500HD Crew Cab LTZ (6.6L Duramax/Allison)
Equalizer Hitch (1200# bars)
|
|
|
11-20-2015, 11:00 PM
|
#13
|
Member
Join Date: Mar 2015
Location: Bellevue
Posts: 37
|
I used my trusty label maker to label each switch.
|
|
|
11-21-2015, 04:25 PM
|
#14
|
Senior Member
Join Date: Aug 2013
Location: Missoula, Montana
Posts: 704
|
Wouldn't help my wife. They already have labels AND are two different colors. I may look at rearranging the switches in that door covered access, or just put a flip up cover on the slide out.
__________________
"I might be movin' to Montana soon..."
2020 Outdoors RV Glacier Peak Titanium
2013 Eagle 29.5RKS (traded in)
2013 Ford 6.7L diesel F350
|
|
|
11-23-2015, 06:37 AM
|
#15
|
Senior Member
Join Date: Oct 2014
Location: Somewhere
Posts: 305
|
Quote:
Originally Posted by nowait
I used my trusty label maker to label each switch.
|
I'm going to try to remember to do that for this next camping season. The lights you can do by trial and error but it's the little red buttons that I have a hard time seeing/remembering which is which!
I still would rather have the lights on a panel right inside the door though. I'm sure there are those that prefer it the way they are. I'm sure Jayco has a hard time trying to keep everyone happy!
|
|
|
11-23-2015, 08:10 AM
|
#16
|
Senior Member
Join Date: Jan 2011
Location: Vienna
Posts: 2,044
|
Quote:
Originally Posted by nowait
I used my trusty label maker to label each switch.
|
X2. Worked great for us!
__________________
Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
|
|
|
11-23-2015, 08:39 AM
|
#17
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Quote:
Originally Posted by nowait
I used my trusty label maker to label each switch.
|
On the list of mods for Spring 2016. Along with rearranging the sequence.
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|