Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 05-19-2014, 06:21 AM   #11
Senior Member
 
Join Date: Jul 2012
Location: CT
Posts: 361
I like the occupancy sensor. Where did you get that?
__________________

__________________
Model X19H Expandable
GMC Sierra Pick up

Been a camper since I was a kid, and that was a long time ago :)
From pup tents with no floors, to tents with floors and flies, to a pop up, to the expandable.
chuckworkb is offline   Reply With Quote
Old 05-19-2014, 06:40 AM   #12
Site Team
 
norty1's Avatar
 
Join Date: Jan 2011
Location: Charleston, SC
Posts: 12,047
Nice mods. I have one of those drying rods made of wood, they work well but sometimes water condensate from the ac will keep your clothes wet.
__________________

__________________
Moderator
2011 351RLTS Eagle, Mor/Ryde suspension & pin box
06 F350 Lariat PSD, SRW, LB, CC, EGR delete kit, 16K DrawTite hitch, Timbrens, TST TPMS

Can't find what you're looking on JOF? Try:Jayco Owners Forum Custom Google Search
"It's easier to fool people than to convince them that they have been fooled." - Mark Twain
norty1 is offline   Reply With Quote
Old 05-19-2014, 08:26 PM   #13
Junior Member
 
Join Date: Apr 2014
Posts: 16
Thanks. I got the occupancy sensor of the eBay . The original connectors that came with the occupancy sensor didn't make good connection and melted within the first 10 minutes so I pulled it all apart and soldered wire on too those contacts
fishfire is offline   Reply With Quote
Old 05-19-2014, 09:48 PM   #14
Senior Member
 
Join Date: Jan 2014
Location: Aurora CO
Posts: 2,336
Quote:
Originally Posted by fishfire View Post
I made a clothes drying rack that mounts to my roof ladder out of a leg of a pop up tent that took flight like a kite in the wind a couple of weekends ago. I had seen a picture of a wooden one on the internet so I thought what the heck let's make it out of the tentAttachment 12901Attachment 12902Attachment 12900/ATTACH] leg
This looks like it hinges on the single u clamp, and stops on the other side due to the length.

And some sort of PVC bushing around the ladder post?

Do you do anything to keep this in the storage position?
__________________
Jim & Kim from Colorado

2014 Eagle 30.5 RLS
2015 Dodge 3500HD SRW 6.7L
Click on my profile for Mods and notes
Jmooney is offline   Reply With Quote
Old 05-19-2014, 10:08 PM   #15
Junior Member
 
Join Date: Apr 2014
Posts: 16
I used a three-quarter inch PVC coupling and a 1-inch to hole strap. When in the up position I have a piece of velcro I wrap around a ladder to hold in place
fishfire is offline   Reply With Quote
Old 05-19-2014, 10:12 PM   #16
Junior Member
 
Join Date: Apr 2014
Posts: 16
I also mounted a 27 watt LED flood light up under the second awning by the outdoor kitchen ran the wires down the hunting and put a switch in the compartment where the kitchen is. Now I have light when I'm cooking.
Attached Thumbnails
uploadfromtaptalk1400555532622.jpg  
fishfire is offline   Reply With Quote
Old 05-19-2014, 10:19 PM   #17
Senior Member
 
Join Date: Jan 2014
Location: Aurora CO
Posts: 2,336
Really like the clothes hanger pole. Thanks
__________________
Jim & Kim from Colorado

2014 Eagle 30.5 RLS
2015 Dodge 3500HD SRW 6.7L
Click on my profile for Mods and notes
Jmooney is offline   Reply With Quote
Old 05-19-2014, 10:34 PM   #18
Senior Member
 
havnfun's Avatar
 
Join Date: Jan 2014
Location: Grants, New Mexico
Posts: 2,637
That occupancy sensor sure makes a lot of sense. How did you hook up the wiring to the main lite lines? I am poor with wiring so please be very descriptive for me. Thanks - Jeff
__________________
2014 Jayflight 24FBS Elite. 2009 F150 Supercab UNICORN, 5.4L ,3.73, HD/Max Tow Package, Equal-i-zer 1K,
Progressive EMS-LCHW30, TST 507RV TPMS, Hydro Life HL-200, Maxxis 8008.
Best friend wife, Di, and dog Cooper. RETIRED 6/30/16. WOOHOO!
havnfun is offline   Reply With Quote
Old 05-19-2014, 10:40 PM   #19
Junior Member
 
Join Date: Apr 2014
Posts: 16
Hey Jeff all that I did was pull down the first light that the switch goes to and cut the wires that go to the switch and made them feed the occupancy sensors line side. The wire that went to the light is the load side. By doing it that way I can still use the switch to turn the lights off if I want to
fishfire is offline   Reply With Quote
Old 05-20-2014, 07:17 AM   #20
Senior Member
 
Paintinfool3's Avatar
 
Join Date: Apr 2014
Location: Fort Wayne
Posts: 1,272
how did you wire the occupancy sensor in it looks like middle of roof
__________________

Paintinfool3 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 06:46 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.