Low point drain access

[amabee]

Not a huge deal, but I was bored and did not like having to remove screws every time to get to our low point drains.
Pic are fairly straightforward, the top clips are just loose enough they can be turned allowing the cover to be easily removed. I also put a couple small washers behind the clips to keep it snug but not so tight it was hard to remove.

[Threebutchers]

That's using the noodle.....

[ATTACH][/ATTACH]

[pop up pilot]

my low point drain is on the tank, and way underneath the trailer near a cross member. I found the line from the tank to the pump and put in a tee. I then ran a line over close to the outer frame and put on a ball valve. Now I can just reach down and flip the valve and the tank will drain. The only issue is that the valve is now behind the tire, and water and road debris will be thrown right at the valve. I'm exploring adding mud flaps. Any suggestions?