Mods to my floor, vinyl plank installed

[Flyrotor]

Hey all!
I completed my mod to my 2012 trailer, the old linoleum was showing its age and some of the floor screws were migrating up leaving bumps in the linoleum.

I pulled the screws out and put lock tight on them before resetting them, then I put luxury vinyl plank from LifeProof in the trailer, it’s available at Home Depot, I bought 220 square feet for my trailer and it was just right, I took pictures and I have a link to a video of this project. Not shown in the video, I removed the toilet and laid the plank and reinstalled the toilet over the plank so the cuts are perfect.

Here’s a link to my project https://youtu.be/9fA71KCqOuk

[Magnolia Tom]

Looks great!

[2naEagle]

Looks good. Thanks for the video.

[64osby]

Project looks great.

I have the same project on the list as the -15 this past winter split my vinyl floor end to end, Jayco 26BH. Temporary fix was clear Gorilla tape over the split so we could camp over the holiday weekend.

A couple questions if you don't mind. Trying to get as much information as possible before starting.

Why install over the existing?

It is a snaplock, why glue it?

How much weight was added?

Do you have concerns about cold and heat effecting it? I saw on the product page "For use indoors and in temperature-controlled environments only".

I have talked to two different big box stores and one showed one product that was rated for cold and heat. They said that the core material was different and did not expand and contract as much as the other core materials.

Still considering vinyl sheet or a snaplock, have not decided yet.