Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 02-16-2014, 02:04 PM   #1
Senior Member
 
Join Date: Dec 2012
Location: Southern Indiana
Posts: 1,772
Stove cover and others

I just finished my stove cover. I wanted to cover the entire area. I took a 2x2 piece of sanded Birch [ $3.99 at Menards ] stained it, painted the back with some old latex paint I had and glued some non skid shelf liner on. Also put 2 wood nodes on that rest against the back lip of the stove to prohibit movement. Also added felt pieces to the wall side of the cover. The stain seems lighter because of the camera flash. I'm also getting ready to install some carpet to the steps. Had the grommet kit and carpet already. Going to zip tie them down underneath. Installed the locking fresh water inlet between snow storms. Last year I put in the counter top extension.Click image for larger version

Name:	eagle mods 001.jpg
Views:	90
Size:	75.9 KB
ID:	11396Click image for larger version

Name:	eagle mods 002.jpg
Views:	87
Size:	72.4 KB
ID:	11397Click image for larger version

Name:	eagle mods 003.jpg
Views:	91
Size:	21.1 KB
ID:	11398Click image for larger version

Name:	eagle mods 004.jpg
Views:	113
Size:	23.5 KB
ID:	11399Click image for larger version

Name:	eagle mods 004.jpg
Views:	113
Size:	23.5 KB
ID:	11399Click image for larger version

Name:	eagle mods 005.jpg
Views:	103
Size:	75.6 KB
ID:	11400Click image for larger version

Name:	eagle mods 006.jpg
Views:	89
Size:	64.7 KB
ID:	11401Click image for larger version

Name:	eagle mods 007.jpg
Views:	98
Size:	91.6 KB
ID:	11402Click image for larger version

Name:	eagle mods 009.jpg
Views:	100
Size:	81.2 KB
ID:	11403Click image for larger version

Name:	eagle mods 010.jpg
Views:	99
Size:	65.8 KB
ID:	11404
__________________

__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
TCNashville is offline   Reply With Quote
Old 02-16-2014, 02:18 PM   #2
Senior Member
 
Threebutchers's Avatar
 
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
Nice work all around....step carpet is something I could add to my list, too
__________________

Threebutchers is offline   Reply With Quote
Old 02-16-2014, 02:24 PM   #3
Senior Member
 
Redhorse 823's Avatar
 
Join Date: Jan 2014
Location: Brandon FL
Posts: 715
Nice work
Looks great
__________________

Tom
2014 Jay Flight Swift 294 BHS
2012 Silverado 2500HD 6.0L
Redhorse 823 is offline   Reply With Quote
Old 02-16-2014, 04:36 PM   #4
Senior Member
 
robkelly's Avatar
 
Join Date: Nov 2013
Location: Duxbury
Posts: 5,421
Great looking work!
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2018 Pinnacle 36KPTS
2017 RAM 3500 SRW CTD/AISIN CC LB
robkelly is offline   Reply With Quote
Old 03-04-2014, 11:09 PM   #5
Senior Member
 
kjohn73's Avatar
 
Join Date: Apr 2011
Location: SE Sask.
Posts: 246
Can you elaborate on the locking fresh water inlet? I used a spare piece of el cheapo pine laminated shelving for a stove top/sink cover/cutting board. When it gets ratty, it will be replaced. I like your cover!

Thanks in advance
__________________
2012 Jay Feather 197 w/pull-out
1997 GMC Sub 1500 4x4;
or 2015 Ford F150 4x4 SuperCrew EB
kjohn73 is offline   Reply With Quote
Old 03-04-2014, 11:28 PM   #6
Senior Member
 
Tunce the traveler's Avatar
 
Join Date: Aug 2013
Location: Bellingham,Wa.
Posts: 5,221
Your mods look great and good ideas for all of us but for me there's only 1 problem!!! Every time I think I'm almost done someone posts another great idea that's a must have so now I guess covering the steps will be added to my guy list. Thanks for posting that one.
Tunce the traveler is offline   Reply With Quote
Old 03-05-2014, 08:35 AM   #7
Senior Member
 
Camper_bob's Avatar
 
Join Date: Sep 2013
Location: South Texas
Posts: 4,822
Nice mods!

We used a smaller bamboo cutting board from Tuesday Morning on our stove.

We've been looking at step covers. Would you mind elaborating on how you did those? Did you buy them or make them?
__________________

-2018 Greyhawk 29MV
-1997 Jeep Wrangler YJ (Toad)
-2015 Jeep Grand Cherokee Limited (Soon to be Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
Camper_bob is offline   Reply With Quote
Old 03-05-2014, 02:34 PM   #8
Senior Member
 
Join Date: Dec 2012
Location: Southern Indiana
Posts: 1,772
Quote:
Originally Posted by kjohn73 View Post
Can you elaborate on the locking fresh water inlet? I used a spare piece of el cheapo pine laminated shelving for a stove top/sink cover/cutting board. When it gets ratty, it will be replaced. I like your cover!

Thanks in advance
Kjohn, my camper had the regular round style open fresh water fill with exposed cap. The replacement I bought at CW for $24. The cut out part of the new one was square so I had to "square up" the hole for it to fit. Leveled it up, drilled new mounting holes, reconnected both hoses, butyl taped it, mounted it and applied some Dicor. The reason I did it is because my camper is stored away from home and although the area is gated, I wanted a little deterrent from anyone putting anything but water in the tank. Just paranoid I guess. BTW, I think JR Products makes a locking cover now that has a round insert, so no extra cutting. I'd post the link, but I'm still working how to do it so I don't screw up the entire Forum
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
TCNashville is offline   Reply With Quote
Old 03-05-2014, 02:52 PM   #9
Senior Member
 
Join Date: Dec 2012
Location: Southern Indiana
Posts: 1,772
Quote:
Originally Posted by Camper_bob View Post
Nice mods!

We used a smaller bamboo cutting board from Tuesday Morning on our stove.

We've been looking at step covers. Would you mind elaborating on how you did those? Did you buy them or make them?
Bob, I made them from an old camper mat. It's outdoor carpet from Menards. I think the dimensions I cut them are 22in wide and 21 in long. Steps are 24in wide but I didn't want to go all the way to the edge. The steps on my TT are 10 in wide [pretty standard] with a 1in overhang on both sides. I had the grommet kit as well. Installed 4 grommets on both ends, then I'll wrap the steps with the grommet holes on the underside, then zip tie them tight so they'll be out of sight. If you buy the outdoor carpet, lets say 2ft by 8ft and they will cut to order, the grommet kit and the zip ties it will still be less than half the cost of buying them at CW.
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
TCNashville is offline   Reply With Quote
Old 03-05-2014, 03:04 PM   #10
Senior Member
 
Camper_bob's Avatar
 
Join Date: Sep 2013
Location: South Texas
Posts: 4,822
Quote:
Originally Posted by TCNASHVILLE View Post
Bob, I made them from an old camper mat. It's outdoor carpet from Menards. I think the dimensions I cut them are 22in wide and 21 in long. Steps are 24in wide but I didn't want to go all the way to the edge. The steps on my TT are 10 in wide [pretty standard] with a 1in overhang on both sides. I had the grommet kit as well. Installed 4 grommets on both ends, then I'll wrap the steps with the grommet holes on the underside, then zip tie them tight so they'll be out of sight. If you buy the outdoor carpet, lets say 2ft by 8ft and they will cut to order, the grommet kit and the zip ties it will still be less than half the cost of buying them at CW.
Thanks!!! I'm going to have to look into this!
__________________

__________________

-2018 Greyhawk 29MV
-1997 Jeep Wrangler YJ (Toad)
-2015 Jeep Grand Cherokee Limited (Soon to be Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
Camper_bob is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:16 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.