Any Micro 199 mbs owners?

[Larry Mac]

I would appreciate some measurements when you have a chance.

[dwardin]

Originally Posted by Larry Mac

I would appreciate some measurements when you have a chance.

Let me know what dimensions you want and I will do it tonight when I get home.

[mrmom]

Here are the specs for this trailer. You didn't give the year, but these are for a 2021.
https://www.rvusa.com/rv-guide/2021-...199mbs-tr48392

[Larry Mac]

Mine’s a ‘22– everything should be the same.

[Larry Mac]

Originally Posted by dwardin

Let me know what dimensions you want and I will do it tonight when I get home.

Sorry — phone problems all day.
I need the height from the ground to the lowest part of your coupler when the trailer is level.
Width of your frame near the propane.
If possible the distance from the kitchen lower cabinets to the u shaped dinette.
Trying to see if I can squeeze a twin blow up bed there in a pinch.
95% sure but also need to confirm that the coupler takes a 2 5/16 ball.


Thank you!

[dwardin]

Height of ground to lowest part of coupler is 15-5/8" cant guarantee ground is perfectly level where its at. trailer was.

52" x 106" clear space on floor when slide open.
width of frame at rear of propane tanks 26 3/4"
width at front of camper (outside diamond plate rock guard) 42-1/2"

[Larry Mac]

Thank you. This is very helpful.

[Larry Mac]

Originally Posted by dwardin

Height of ground to lowest part of coupler is 15-5/8" cant guarantee ground is perfectly level where its at. trailer was.

52" x 106" clear space on floor when slide open.
width of frame at rear of propane tanks 26 3/4"
width at front of camper (outside diamond plate rock guard) 42-1/2"

Btw is it a 2 5/16th coupler?

[dwardin]

Yes