Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 11-06-2013, 07:33 PM   #1
Member
 
GBandPB's Avatar
 
Join Date: Oct 2012
Location: Greenwood, MO
Posts: 50
Dining table height in WhiteHawk.

We have the dining table and four chairs option in our WhiteHawk. We love it with one exception, The height of the dining table. It is too short for us. I would like to raise it up approximately 2 inches. There seems to be plenty a room between the top of the table in the bottom of the windowsill. Has anybody ever done this? I'm guessing I can take it apart and add some type of spacer to get the desired height.
__________________

__________________
Greg & Patty
2014 Flagstaff 8528IKWS
2011 Chevrolet Silverado 2500HD Crew Cab
4x4 6.0l v8
GBandPB is offline   Reply With Quote
Old 11-06-2013, 11:13 PM   #2
Senior Member
 
Ladywendolyn's Avatar
 
Join Date: Aug 2011
Location: Manitoba Canada
Posts: 553
We took our table apart in our old camper and installed different legs, as we wanted the ones that were silver with the round pipe in the middle, and we wanted two instead of one so that the table would be sturdier. You can buy the pipe piece in different lengths, and so we got the height we anted. No problems after instal.. As long as it is done well, it wont fall apart. I did go back and check my screws regularly due to the road vibration, but they held well. I had put a bit of silicone or plastic nails of some sort in the hole when I attached them and it kept them from moving.
__________________

__________________


Lady Wendolyn Jayflight 28BHS

For a tour of my glamorous, cool camper, and an "Ad a bifold door Mod: http://mycoolcampingcaravanadventures.blogspot.ca

For these Mods: Master bedroom shelving in closets and countertop extension: http://mycoolcampingcaravanadventure...es-camper.html

For this Mod: Adding a wall light switch to the master bedroom:
http://mycoolcampingcaravanadventure...ht-switch.html
Ladywendolyn is offline   Reply With Quote
Old 12-01-2013, 07:16 PM   #3
Senior Member
 
Join Date: Aug 2013
Posts: 201
GbandPB,

How about something like this:

http://www.wwhardware.com/base-level...-base-levelers

If the leg is wide enough at the base to drill the hole and pound in the t-nut then you would be good to go.

There are other options as well, take a look at the selection here and you can google leg levelers and get a varity of options.

Tim
__________________
Tim

2014 Whitehawk 33BHBS
Equilizer WDH
2014 F250 4X4 Crew Cab 6.2 l 3.73
2010 F150 4X4 Supercrew 4.6l 3.73 (traded in)
t2daniel is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 02:49 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.