|
04-14-2013, 03:50 PM
|
#1
|
Junior Member
Join Date: Jul 2012
Posts: 9
|
Rear Bike Rack/Storage for 2013 Whitehawk 28DSBH?
Does anyone have any idea if it is ok to mount a bike rack or tray to the back bumper of the Whitehawk trailers? If so, any suggestions for what type?
|
|
|
04-19-2013, 12:12 PM
|
#2
|
Junior Member
Join Date: Mar 2013
Location: West Chester, Ohio
Posts: 4
|
I am interested in this answer also. Anybody know?
|
|
|
04-24-2013, 09:04 AM
|
#3
|
Senior Member
Join Date: Aug 2011
Location: Millington
Posts: 173
|
I honestly don't know, but, you may want to call Jayco Customer Service and ask them.
__________________
2014 Ford F-250 Lariat Crew Cab 4X4, 6.2L gasser, 3.73
2013 Jayco White Hawk 28DSBH
2012 Ford F-150 Lariat Supercrew 4X4, 3.5L Ecoboost, 3.73 (traded)
2005 Jayco 1207 (second PUP)
1976 Coleman Brandywine (first PUP)
|
|
|
04-24-2013, 02:38 PM
|
#4
|
Member
Join Date: Jun 2012
Location: Newnan
Posts: 34
|
I would not do it
I researched the same question when I purchased my Whitehawk. The bumpers are not reinforced enough to handle the weight of bicycles bouncing up and down as you go down the road. If you do a little digging you will find incidents and photos of bike racks that broke the bumper off in mid-trip. Some dragged the bikes down the road on a hanging bumper, some just dropped the bumper and bikes in the road. Just my two cents, but I would not do it unless you go to a welder and have them reinforce the bumper.
__________________
Bill
2012 F-150 Lariat, Ecoboost, 3.73, Max Tow Pkg
2013 White Hawk DSBH
Equalizer Brand 10,000 lb. WD Hitch
|
|
|
04-24-2013, 03:25 PM
|
#5
|
Senior Member
Join Date: Apr 2012
Location: Kincardine Ontario
Posts: 163
|
Consider a receiver and bike rack on the front of the TV. It works well for us.
__________________
Owenssailor
Ont. Canada
2017 Chev 4x4 Crew Cab 5.3l 3.42 8 spd trailer pkg
2011 Jayco JayFeather Select 28U
Equal-i-zer 1400/14000
Rotochocks
|
|
|
04-24-2013, 03:40 PM
|
#6
|
Senior Member
Join Date: Sep 2011
Location: Long Island, NY
Posts: 847
|
The majority of comments I've seen about people installing a bike rack on the bumper is negative. And when I say negative, I'm talking about the bumper either completely twitsting, falling off or whatever. Not good!
The suggested course of action is to physically weld an actual receiver to the frame of the TT and then use a bike rack.
__________________
2013 Jayco Jay Flight 26RLS - 2013 1500 Ram Big Horn
2013 Jayco White Hawk 28DSBH - 2010 V8 Tundra
2012 Jayco X17Z SOLD!:Beerchug:
|
|
|
04-24-2013, 04:17 PM
|
#7
|
Senior Member
Join Date: Oct 2011
Location: Central California
Posts: 2,283
|
Often discussed. When I researched it I came up with 3 options, all require welding.
1) Weld a frame to frame receiver on the rear of your TT.
2) Cut off and repalce the factory bumber with a heavy guage steel version that is fully welded and supported to the TT frame
3) Take you chances with the thin guage steel bumper, but have additonal support welded between it and the frame and ensure the current welds aren't just tack welded.
I went with #1, found a local shop that maked cusotmer receivers for TT. Cost me $275
__________________
2020 Ram 1500 5.7L
2007 Chevy Duramax LMM/Allison (Sold)
2012 Jay Flight 29QBH (Sold)
2012 Jay Flight 26BH (Sold)
|
|
|
04-24-2013, 06:45 PM
|
#8
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,736
|
Quote:
Originally Posted by clubhouse
Often discussed. When I researched it I came up with 3 options, all require welding.
1) Weld a frame to frame receiver on the rear of your TT.
2) Cut off and repalce the factory bumber with a heavy guage steel version that is fully welded and supported to the TT frame
3) Take you chances with the thin guage steel bumper, but have additonal support welded between it and the frame and ensure the current welds aren't just tack welded.
I went with #1, found a local shop that maked cusotmer receivers for TT. Cost me $275
|
X2
|
|
|
04-29-2013, 11:55 AM
|
#9
|
Junior Member
Join Date: Apr 2013
Location: Long Island, NY
Posts: 13
|
Our dealer welded a receiver to the rear frame and bumper so a standard 2" bike rack could be used. I wouldn't just use a bike rack secured to the bumper only.
__________________
2008 Chevy Avalanche LTZ
2013 Whitehawk DSBH
|
|
|
05-07-2013, 11:52 PM
|
#10
|
Junior Member
Join Date: Jun 2012
Posts: 17
|
Hey Guys,
This is taken directly from page 115 of the owners manual...
Do not add items to the RV rear bumper. Add-on items will eventually
damage your bumper. Damage caused by such aftermarket equipment
installation or improper loading voids the Towable Limited Warranty.The rear bumper of your RV is not designed to carry cargo. Items that extend
beyond the bumper OR weigh over 100 lbs. (45kg) will place undo strain on the
bumper.
The 100 lb. bumper capacity includes the weight of the spare tire that may have
been attached at the factory.
NOTE: Some items may fall within the given weight range, however, can still
cause damage. Over time, weight added to the bumper will cause damage from
the motion created while traveling. In addition, extra weight behind the axle may
reduce the hitch weight (leading to adverse handling conditions from wind gusts
and/or passing traffic).
If I ever put one on I would weld it directly to the frame as mentioned above.
__________________
2012 White Hawk 31DSLB
2013 F150 FX4, 6.2L, 3.73ELD w/ Max Tow Pkg
|
|
|
05-08-2013, 06:38 AM
|
#11
|
Junior Member
Join Date: Jul 2012
Posts: 9
|
Thanks for your help!
Quote:
Originally Posted by Johnny5
Our dealer welded a receiver to the rear frame and bumper so a standard 2" bike rack could be used. I wouldn't just use a bike rack secured to the bumper only.
|
Any chance one of you that did the welded receiver hitch could include a picture, just wanting to see where they welded it...to show a local welder. Thanks!!!
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|