Jayco RV Owners Forum

Thread Tools Display Modes
Old 05-11-2014, 02:17 PM   #1
Junior Member
Join Date: May 2014
Location: Fergus Falls
Posts: 1
Slideout not sealed

We recently purchased a 2006 JayFeather 213. In the process of checking out the rear slideout hardware we noticed that there are several areas under the bed that are not sealed when the bed is extended. We live in Minnesota and even a very small opening can be a problem for mosquitoes. One of the openings is approximately 3inches by 1inch. There are also openings on both sides of the rails. Is this normal or are we missing something? The wind coming through actually moves the skirt at the end of the bed.

welding dad is offline   Reply With Quote
Old 05-11-2014, 07:34 PM   #2
Senior Member
Seann45's Avatar
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 9,701
It needs to go into the shop and have the slide out re-aligned. and/or new gaskets. This is not a job I would suggest doing yourself...
PS welcome to the group.
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 765 watts of solar, 6-6 volt batteries (696 amp hour), 2000 watt (4000 surge) whole house inverter.
175 days boondocking in 2017
215/2016, 211/2015, 196/14, 247/13, 193/12

Seann45 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 04:26 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.