I used 12” sections of aluminum Uni-strut to attach my panels to the roof. I layed out and secured three anchors into the plywood roofing for each piece of Uni-strut (six Uni-struts per panel), covered each anchor site with a wide piece of Eternibond, and then secured the Unistrut. I then covered everything with lots of Dicor. With six Uni-strut sections per panel, secured with a total of 18 stainless steel anchored screws, my panels aren’t going anywhere.....
__________________
Be Safe, and Everyone Goes Home,
Rick
2014 RAM Laramie 2500 w/6.7L Cummins Diesel and Automated Safety Hitch
2016 377RLBH Jayco North Point
300W of Suntech Solar w/Rogue MPPT Controller & Xantrex 2000W PSW Inverter
|