Hi, I have a BAL tounge jack. I need to lubricate it. What do you use? My manual says to oil it through the oil hole on top. I do not see a oil hole on top. Help please. Thanks
__________________
George & Barbara
2012 Toyota Tundra dbl cab 4x4 5.7 V8
2006 Jayco Jay Feather Sport 186
If no one here can give insight into the situation, try calling Jayco direct at 574-825-5861. They are quite helpful
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
I used CRC "dry" silicone spray lube I picked up at a Fastenal store. A "dry" lube because the liquid base used is a polar solvent that evaporates quickly, leaving only the silicone. I used it on the LCI tongue jack on our White Hawk(ran it out to near full extension and sprayed it down), as well as the giving the the bolts on the spring hangers and suspension equalizers a shot, and the gear racks on the slide. Seems like an ideal lube for these areas since they aren't surfaces you want dirt and grit sticking on. A little pricey ($12 for a can), I'll see how it does.