Wheel removal

[krcarter54]

I'm getting ready to service the wheel bearings on our 18 S-RB. I'd like know if it's better to place a floor jack under each individual axle and remove one wheel at a time or do I want to jack up the trailer by placing the jack under the frame. I don't want to twist / warp anything by raising the trailer incorrectly. Thanks in advance for any advice concerning this issue!
HaPPy Travels

[Quahog]

Under the frame not the axle.

[licamp]

Dual axle? drive camper onto blocks lifting tire you want to fix then switch. Easer to jack up under frame and do one side at a time but blocks lift it enough to remove tire.

[Nighthawk 96]

Never put a jack under your axle; you could bend it.
Jack up the frame.

[dmward]

I picked up one of these and I hope I don't have to use it, but looks very handy if I do:

http://www.amazon.ca/gp/product/B000I4JPZE?psc=1&redirect=true&ref_=oh_aui_detailp age_o00_s00

[Tim L]

The warnings about axles are specific to torsion axles. If you have leaf springs, you are totally fine to use the spring perch/pad to jack up a wheel at a time.