2007 Seneca 35GS transfer switch location?

[N0CZV]

Hello!

Can anyone tell me the location of the automatic transfer switch on the 2007 Seneca 35GS? I’ve been looking, searched the manual - no joy.

Thanks
Steve

[Grumpy]

Under the wardrobe. You have to remove the drawers.

[N0CZV]

Once I locate the switch, I want to verify that it is working. I don't think its working right. My slides don't operate correctly if the generator is running - shore power is plugged in. Dealership told me not to run the generator while plugged into shorepower. I bought it used, I don't think the dealership understood how several things worked on this unit.
I'm only running 20 amps through an adapter, for battery charging and lights until I get the 50 amp pedestal up and running.....

Lots of manuals included, not much on how everything interconnects....

Steve

[Grumpy]

He is correct. If the GENY is running the transfer switch disconnects shore power. Yous should not have shore power connected when you start the geny. Do both air conditioners run on geny? Only possibility is a dirty contact in the transfer switch if not which means you are only powering half your panel and the converter is not powering on.

[1averageguy]

Your slides run off the 12v side of the house. They shouldn't need to use shore power or the generator. You may have an issue with the 12v charging side of the inverter if the slides work correctly on battery.

[Jagiven]

Originally Posted by 1averageguy

Your slides run off the 12v side of the house. They shouldn't need to use shore power or the generator. You may have an issue with the 12v charging side of the inverter if the slides work correctly on battery.

Slides work on the 12V DC system. So I would start looking there. My first thought with a 2007 MH, what is the condition of the battery(s). They could be shot.

The power converter only cares it is getting 120V AC to it, does not care if it is from the genny or shore power post, it is all the same 120V power. So if the slides work on shore power, and not correctly on genny power. I suspect bad batteries and dirty power from the genny.

[xtrmdad1969]

Anyone know where the automatic transfer switch is on a 2020 Jayco Eagle 330rsts?? Trying to connect a generator.