Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-11-2013, 08:45 PM   #1
Junior Member
 
NYDP77's Avatar
 
Join Date: Jan 2013
Location: NY
Posts: 10
3M 5200 for roof repair.

Anyone use this product. I used it last year on pop up roof. It seemd to create a great seal.
How long does it last or any way to test if its leaking?*
__________________
Dave

2012 Jay Series 1206
2011 Pathfinder
NYDP77 is offline   Reply With Quote
Old 02-11-2013, 09:24 PM   #2
Senior Member
 
Denise's Avatar
 
Join Date: Jul 2009
Location: Mostly the US
Posts: 10,002
Members that I have gotten to know here in the past three years have not only guided us on how to look for roof seal compromises, but how to seal potential leaks. We (me because I weigh a lot less then Ray LOL) use Dicor Self Adjusting sealant.


__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
Denise is offline   Reply With Quote
Old 02-12-2013, 06:13 AM   #3
Senior Member
 
edatlanta's Avatar
 
Join Date: Dec 2009
Location: Maplesville - Home Base
Posts: 3,059
I use 5200 on marine applications. It is tough stuff. The regular version takes 7 days to set up and is considered a permanent product. I don't know if I would use it on a roof or not because once set up, it is extremely difficult to remove.
__________________
Ed
KM4STL

2006 GMC 2500HD CCSB 4x4 Duramax/Allison, Titan 52 gallon fuel tank, Prodigy Controller, B&W Companion Hitch
2010 Jayco Designer 35RLTS, Cummins/Onan RV QG 5500 EVAP, Progressive Industries EMS-PT50X, TST Systems 507 TPMS, RV Flex Armor Roof
edatlanta is offline   Reply With Quote
Old 02-12-2013, 07:33 AM   #4
Senior Member
 
Join Date: May 2010
Posts: 552
3M 5200 was developed to be used as an adhesive in the marine industry and is used to fasten decks to hulls. Once it cures, the only way to remove it is to cut it off. I've seen fiberglass decks that have been pulled apart from trying to remove fittings that were bedded with 5200. There are better choices for what you want to do.
__________________
2010 22FB(Ret)
2013 F250 XLT
I now have a Keystone Outback, but I try to help when I can.
---------------------
Bitter Gun Owner
Bitter Clinger
Armed Infidel
Bob Landry is offline   Reply With Quote
Old 02-12-2013, 09:16 AM   #5
Senior Member
 
Jagiven's Avatar
 
Join Date: May 2012
Location: Minnesota
Posts: 9,739
I guess that means it is fairly permanent.

Here is a link to a pdf on the 3M website.
__________________

2012 Jayco X23B
2020 Ram Laramie 3500 SRW Air ride 50Gal fuel tank.
2007 Dodge Dakota Quad Cab (sold)
Equal-I-zer 4-Point Sway Control
Jagiven is offline   Reply With Quote
Old 02-12-2013, 07:37 PM   #6
Junior Member
 
NYDP77's Avatar
 
Join Date: Jan 2013
Location: NY
Posts: 10
Re: 3M 5200 for roof repair.

I had read about it on some forums. Just wanted to get opinions. Had to make a quick choice on what to use so I used that product. I thought if it were used for hulls it would be a good product to keep rain out and withstand the movement of the pop up during travel. Hulls of a boat are both below and above the water line.* Also wanted something permanent as I would never want water to get in and have no intentions of ever doing anything to the roof. The hole in the roof was a triangular crack less than the size of a quarter. Just wanted to know if there was any way to test it for a leak.
__________________
Dave

2012 Jay Series 1206
2011 Pathfinder
NYDP77 is offline   Reply With Quote
Old 02-12-2013, 07:51 PM   #7
Junior Member
 
NYDP77's Avatar
 
Join Date: Jan 2013
Location: NY
Posts: 10
Re: 3M 5200 for roof repair.

PS thanks for the you tube video I subscribed to the RV geeks channel. I'm new to it purchased my first pop up last year and got the hole in the roof just worried about it.
__________________
Dave

2012 Jay Series 1206
2011 Pathfinder
NYDP77 is offline   Reply With Quote
Old 02-12-2013, 08:16 PM   #8
Senior Member
 
Join Date: Dec 2010
Location: Central PA
Posts: 1,236
You can test for a leak by spraying it with a high pressure hose. A car wash or a pressure washer would do it. Spray it from every angle. I doubt that you will have a leak. Happy Camping!
__________________
No I am NOT retired. I work full time.:D

Tracy from Central PA

2010 Jayco 17Z Ex-Port
2004 Ford Explorer V8 with the tow package
2010 Camping Stats
Nights Camping 132 - Nights Camping in My Z 102
2011 Camping Stats
Nights Camping 107
2012 Camping Stats
Nights camping 133 - Nights camping in my Z 128
2013 Camping Stats
Nights Camping 66 Nights
tlhdoc is offline   Reply With Quote
Old 02-12-2013, 08:57 PM   #9
Senior Member
 
Join Date: Apr 2012
Location: Kincardine Ontario
Posts: 163
I've used 5200 often on our boat. It is very difficult to remove. Lestoil is the only thing I've found that will soften it. 3M also has a 4200 product that is considered not permanent. It is only difficult to get apart as opposed to near impossible. I would think using a product meant for the job would be best.
__________________
Owenssailor
Ont. Canada
2017 Chev 4x4 Crew Cab 5.3l 3.42 8 spd trailer pkg
2011 Jayco JayFeather Select 28U
Equal-i-zer 1400/14000
Rotochocks
owenssailor is offline   Reply With Quote
Old 02-13-2013, 08:40 AM   #10
Junior Member
 
NYDP77's Avatar
 
Join Date: Jan 2013
Location: NY
Posts: 10
Re: 3M 5200 for roof repair.

Did I not use the right product for the job? I guess I'm not understanding why I would not want the repair to be permanent?
__________________
Dave

2012 Jay Series 1206
2011 Pathfinder
NYDP77 is offline   Reply With Quote
Old 02-13-2013, 11:43 AM   #11
Site Team
 
Crabman's Avatar
 
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,091
Quote:
Originally Posted by NYDP77 View Post
Did I not use the right product for the job? I guess I'm not understanding why I would not want the repair to be permanent?
I think as long as you never have to tear into the affected area again you will be fine and the 5200 will do a good job as a sealant. What the others are stressing is not to use it somewhere that you may have to access again in the future, or it will be a bear to remove.
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
Crabman is offline   Reply With Quote
Old 02-13-2013, 10:51 PM   #12
Senior Member
 
Join Date: Apr 2012
Location: Kincardine Ontario
Posts: 163
Yes - Crabman said it more clearly than I did. Removing 5200 is extremely difficult. It does seal. I once had to separate 2 pieces of teak with 5200 between them. It was hammer and chisel all the way through the seam. Your repair should not leak.
__________________
Owenssailor
Ont. Canada
2017 Chev 4x4 Crew Cab 5.3l 3.42 8 spd trailer pkg
2011 Jayco JayFeather Select 28U
Equal-i-zer 1400/14000
Rotochocks
owenssailor is offline   Reply With Quote
Old 02-14-2013, 02:12 PM   #13
Senior Member
 
Join Date: May 2010
Posts: 552
Quote:
Originally Posted by owenssailor View Post
I've used 5200 often on our boat. It is very difficult to remove. Lestoil is the only thing I've found that will soften it. 3M also has a 4200 product that is considered not permanent. It is only difficult to get apart as opposed to near impossible. I would think using a product meant for the job would be best.
Using the correct product will always give the best results for any given job. A lot of people are always going to "go cheap" and there's not much that can be done for them except read their posts where the fix didn't work.
As far as 3M 4200, I don't know if 3M has discontinued that. I used it to put in a couple of thru-hulls for air conditioners, but I started having an issue of buying it that had already cured and turned hard in the tube. 3M acknowledged the problem, but I never did hear what they did about it. 4600 is a very similar product and I've used it quite a bit without problems, including below-waterline applications.
__________________
2010 22FB(Ret)
2013 F250 XLT
I now have a Keystone Outback, but I try to help when I can.
---------------------
Bitter Gun Owner
Bitter Clinger
Armed Infidel
Bob Landry is offline   Reply With Quote
Old 02-14-2013, 02:30 PM   #14
Site Team
 
Crabman's Avatar
 
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,091
But 5200 is not cheap, so I don`t think the OP was looking for the cheap way out.
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
Crabman is offline   Reply With Quote
Old 06-04-2013, 03:49 AM   #15
Junior Member
 
Join Date: Jun 2013
Posts: 1
Quote:
Originally Posted by Crabman View Post
But 5200 is not cheap, so I don`t think the OP was looking for the cheap way out.
I think, it's not that moment when we should save money. reliability is much more important.
JohnLr is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 01:24 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.