we're in el paso(hot). just discovered neither of my two units are blowing cold off genny power. blows ambient air that's all. breakers good. vents open. thermostats set right. no the filters aren't dirty!!! i don't detect an audible change in the genny when the compressor is supposed to kick in on cool mode.
any ideas? what is common to both units to exhibit the same problem. i'm stumped. they were working when i bought it two months ago!!
yessir, the panel says 80 amps with both units running. how this is possible with a 30 a service is beyond my technical ability. anyway, the units' compressors don't seem to engage. any ideas on what to do? thanks