|
02-03-2016, 07:58 PM
|
#1
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
Anode rod in an Atwood?
Good evening Folks!
I'm sorry if this topic has been covered. I did a search prior to this post but didn't see anything regarding my question.
Let me start by saying I realize that Atwood water heaters don't require anode rods because the tanks are aluminum . I also realize that Suburban water heaters use anode rods to deflect corrosive elements away from the steel tank to the expendable rod.
As I'm poking around online I see that companies like Camco actually make a rod for the Atwood aluminum heaters and that some folks use them.
Is there any benefit to using an anode rod in an aluminum tank? Is there a steel heater element inside the take thats prone to corrosion? I'm just wondering if I'm missing something here.
Thanks in advance
Jloco
__________________
2016 Jay Flight 38FDDS
|
|
|
02-03-2016, 08:01 PM
|
#2
|
Senior Member
Join Date: Aug 2011
Location: Missouri City, The Republic of Texas
Posts: 5,063
|
I don't think there is a benefit to a rod in an Atwood.
__________________
Cheers,
T_
2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
|
|
|
02-03-2016, 08:06 PM
|
#3
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,064
|
Quote:
Originally Posted by RedHorse1
I don't think there is a benefit to a rod in an Atwood.
|
X2
__________________
Don
|
|
|
02-04-2016, 08:31 AM
|
#4
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,726
|
They just found a great way to separate you from your money... sell you something you don't need...
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
02-04-2016, 08:35 AM
|
#5
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
Thanks Folks.. I figured it was a gimmick.
I just wasn't sure if there were some components (heating element for example) within the Atwood aluminum tanks that would benefit from a rod.
I also read some posts online that the use of an anode rod in an Atwood may even void the warrantee.
__________________
2016 Jay Flight 38FDDS
|
|
|
02-04-2016, 10:05 AM
|
#6
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,858
|
PT Barnim said it best. I like the quote in my sig. also.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
02-04-2016, 05:59 PM
|
#7
|
Senior Member
Join Date: Jun 2013
Location: McKean, PA
Posts: 1,073
|
Most anode rods are made of zinc. Zinc and aluminum are very close to each other in the galvanic series, so little if any protection would occur.
__________________
2011 Skylark 21FKV
|
|
|
02-04-2016, 07:14 PM
|
#8
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
I found this on the web as well.
Atwoods position on the topic:
WATER HEATER TANK CORROSION
Pinhole leaks from galvanic corrosion may cause the water heater tank to fail. Microscopic particles of metals (like iron and copper) suspended in water, set up a reaction inside the water heater that is not unlike the principle on which an automotive battery operates. The aluminum tank is the anode and the metals in the water serve as the cathode. Consequently, the aluminum gradually sacrifices itself and aluminum particles are carried away with the water flow.
A white scaly material (aluminum oxide) often is formed around the points where the heaviest action is taking place and heat accelerates the process. Severity of the problem varies considerably in different locales depending on the metal and mineral content of the water. White deposits inside the water heater tank are usually from water impurities that have settled out.
Periodic flushing of the water heater tank under pressure is recommended to slow down this process. For flushing instructions see your owners manual or contact Atwood for a copy of our recommended procedure.
ATWOOD CLAD TANK
The Atwood water heater tank is constructed of a core of high strength aluminum. The interior of the tank consists of a 15% thickness of type 7072 aluminum (pure aluminum and zinc) that is fused to the core during the rolling process.
This material protects the tank from the affects of heavy metals and salts found in waters throughout the country. It is anodic to these heavy metals and acts much like an anode in a steel glass lined tank except it will last much longer. There is also no need to replace an anode on a yearly basis. Flushing the tank on a regular basis has been found to be helpful in insuring the best performance of your water hater and adding to the useful life of the tank. For flushing instructions see your owners manual or contact Atwood for a copy of our recommended procedures.
Use of an anode rod does in fact void the warranty. It's right in the brochure. I can't believe camco and others market such a thing. It makes me wonder what other bogus crap they're pushing. They even have the stones to the 'Atwood' name on the packaging.
__________________
2016 Jay Flight 38FDDS
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|