Atwood Levelegs acting up
Our Atwood’s Levelegs system started acting up. When we left our last site, I pressed the RET ALL FRONT and all sounded well until the pass front leg started racheting and didn’t stop until I pressed a button on the control pad. Got to our next site and nothing responds to key pad inputs. The pass front light on the controller is blinking green. I’ve manually cranked the fronts to unhook and level front to rear. Tried to ext the rear stabilizers and auto level but zero response. I’ve disconnected power with no results and unplugged the pass front on the board - still a green light winking at me. (Solid green on the other legs).
Today, I hitched up and manually retracted the front legs, raised the inner leg and manually extended the front and rear legs about 2 1/2” so the system could be re-homed. The rears never moved and only one front leg retracted and continually ratcheted until I pressed a button to halt the process. I disconnected the driver front (the front that didn’t move) at the control board and tried to move the front pair as that should have put the system in error mode - nothing happened. Rears and driver front lights are solid green and pad front is blinking green. I’ve checked fuses and swapped them to be sure. I’ve disconnected power and sensors from the fronts and nothing changes in the control panel. Officially stumped - and tired of manually cranking these things. Any thoughts ?
|