I have been stationary for a bit so didn't mess with the auto level. I had to move 10' forward the other day due to a tree problem. So I took the opportunity to mess with auto level a little bit.
First of all I should mention my RV is a TT with 4 point auto leveling.
Before I moved I was already pretty level. So I did a zero point calibration. Then I moved (forward 10'), unhitched and hit auto level on my phone app. By the way I am on a pretty level cement pad.
It started to work fine, but then kept going and going and then lifting tires off the ground and one jack was way off the ground so I stopped it. Hindsight I should have tried it again with the control in the basement, which by the way, the up and down button on it only raises or lowers the hitch jack not the front jacks! But I didn't, I just manually leveled it and was done.
I guess I can raise my jacks and try the basement control or even the touchpad inside. But then I need to bring my slides in because if it does what its been doing it will tweak the slides if they are out. Do you think it will make a difference?