Bedroom TV Mounting

[Jstlouis]

Trying to mount a small tv in the bedroom behind the sticker; however, the stud finder doesn't indicate a stud behind the sticker location. Pretty sure the only thing solid in the wall is the toilets vent tube running to the roof. Makes sense for the TV to be mounted in this location, just not sure how Jayco thought it would be accomplished.

[Force]

There is supposed to be a square of plywood behind the wall to screw into, not studs. No issues installing a TV in my camper in that spot anyway, definitely screwed into something solid in there

[Jstlouis]

Thanks Tom, the TV's installed

[chuck5395]

Originally Posted by Jstlouis

Thanks Tom, the TV's installed

Jstlouis,
What mount did you go with? I'm looking at doing this too and would appreciate knowing which mount you used.

[Jstlouis]

I used a cheap mount from Amazon made by "Mount-It" It only swivels and tilts.

[James & Carol]

Hi, do u have any idea how big that piece of plywood is? How large a tv can I install? & how long should the screws be? Thanks for your help!

[Big1]

I install my here but if you go close to where the mark is at you should get it and I say should very lightly. I took about four lags bolts 1" and screw them until snug.

[Jstlouis]

In addition to starting this thread, I contacted Jayco customer service. They told me Jayco used a couple different size plywood blocks depending on camper. I already had the tv mounted based on Tom reply; however, customer service would have emailed me a schematic of the wall so I could measure. As far as fastener length, my tv is mounted on a inside wall so I used 1 inch buttom heads.