Bent carriage bolts
Installed airbags on the truck today.
The bottom bracket, that rests on top of the axel, then straps to the the axel using a bracket on the bottom and carriage bolts between the two.
Barely put any torque on them and the carriage bolts bent. ( 2-3 degrees perhaps )
Bought new ones, was extremely careful to stay even and tightened 1/4 turn per side, evenly. Same result.
Anyone else ever noticed or had similar problem?
__________________
Jim & Kim from Colorado
2014 Eagle 30.5 RLS
2015 Dodge 3500HD SRW 6.7L
Click on my profile for Mods and notes
|