Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-05-2022, 05:36 AM   #1
Senior Member
 
robkelly's Avatar
 
Join Date: Nov 2013
Location: Duxbury
Posts: 7,058
BMPro firmware Updates

Does anyone know how to turn off the automatic updates to the BMPro firmware? Twice now I've gone to use the system from the app on my phone (Apple) and have been forced to run the update before I could do anything - there was no option to postpone until later.

So far this hasn't been an issue, but I don't want to get stuck needing to do something quickly (e.g. pull in the awning because the wind suddenly kicked up) and can't because I'm waiting for the update to complete.

Thanks in advance!
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2022 Eagle HT 28.5RSTS
2017 RAM 3500 SRW CTD/AISIN CC LB
robkelly is offline   Reply With Quote
Old 08-05-2022, 06:32 PM   #2
Member
 
Join Date: Nov 2020
Location: Waynesville NC
Posts: 74
I've had the same problem, and haven't found a work-around for it.
__________________
2021 274 CKDS
CTGT is offline   Reply With Quote
Old 08-05-2022, 06:54 PM   #3
Member
 
Balibe's Avatar
 
Join Date: Mar 2018
Location: So. Maryland
Posts: 83
Have you tried this? None of my apps update unless I tell them to in the App Store .....

Go to Settings .... Tap App Store .... Under Automatic Downloads, Turn off App Updates ....

To note ..... if you turn on App Store notifications settings you will get the badge on the app with the number of apps that have updates. Then select them at you leisure .....
Balibe is offline   Reply With Quote
Old 08-07-2022, 11:32 AM   #4
Senior Member
 
robkelly's Avatar
 
Join Date: Nov 2013
Location: Duxbury
Posts: 7,058
Quote:
Originally Posted by Balibe View Post
Have you tried this? None of my apps update unless I tell them to in the App Store .....

Go to Settings .... Tap App Store .... Under Automatic Downloads, Turn off App Updates ....

To note ..... if you turn on App Store notifications settings you will get the badge on the app with the number of apps that have updates. Then select them at you leisure .....
Thatís the way my phone is set up. The issue Iím having is with the BMPro firmware, not the app. Thanks though
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2022 Eagle HT 28.5RSTS
2017 RAM 3500 SRW CTD/AISIN CC LB
robkelly is offline   Reply With Quote
Old 08-07-2022, 11:37 AM   #5
Senior Member
 
Join Date: Jan 2022
Location: Baton Rouge
Posts: 321
once you update your phone app or the BmPro app on the Tablet it will push a firmware update to the node. It only takes a couple of mins. There has been one update in 6 months.
__________________
2022 Jayco Pinnacle 32RLTS, Onan 5500, 380 Watts
Solar, GoPower MPPT, Four 6 Volt batteries

2017 Ram Cummins 3500, 4x4, Dually Aisin, 3.73
B&W hitch
Learjet is offline   Reply With Quote
Old 08-07-2022, 11:45 AM   #6
Senior Member
 
robkelly's Avatar
 
Join Date: Nov 2013
Location: Duxbury
Posts: 7,058
Quote:
Originally Posted by Learjet View Post
once you update your phone app or the BmPro app on the Tablet it will push a firmware update to the node. It only takes a couple of mins. There has been one update in 6 months.
Thanks! Iíve had two updates in two weeks, but that could be because the rig is new and the updates are ďcatching upĒ
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2022 Eagle HT 28.5RSTS
2017 RAM 3500 SRW CTD/AISIN CC LB
robkelly is offline   Reply With Quote
Old 08-07-2022, 04:02 PM   #7
Senior Member
 
jetlag's Avatar
 
Join Date: May 2021
Location: Vanceboro
Posts: 1,144
The only time the BMPRO tablet, it is Android, should update the firmware is if you manually leave BMPRO and go to the play store. You then type in either BMPRO or Jay command, either one will bring up the APP, and it will then tell you if you have an APP update. Once you tell it to run the update, and once it's finished, within a minute or so it will launch into the firmware update. Otherwise, you wouldn't know if you have an update. The only way I know, typically, is when someone here posts that we have a new update on the wall tablet. Otherwise, all is well. The APP on the phone, however, updates whenever Android decides to, but I think that is a setting on my phone. BTW, I have an Android phone, so not familiar with apple. I have never had the phone APP disrupt anything I might have been doing with the camper.
__________________
2021 Ram Laramie 3500 SRW Air ride 50Gal fuel tank.
2021 Jayco Pinnacle 36FBTS, Andersen Ultimate Hitch
jetlag is offline   Reply With Quote
Old 08-07-2022, 05:10 PM   #8
Senior Member
 
Join Date: Jan 2022
Location: Baton Rouge
Posts: 321
I updated my Iphone app first and it pushed a firmware update to the node...next day I updated the tablet in the RV and it either pushed another firmware update or the same one again....Maybe that is why it may have seemed annoying to some.
__________________
2022 Jayco Pinnacle 32RLTS, Onan 5500, 380 Watts
Solar, GoPower MPPT, Four 6 Volt batteries

2017 Ram Cummins 3500, 4x4, Dually Aisin, 3.73
B&W hitch
Learjet is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 04:42 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.