|
|
09-27-2014, 05:33 PM
|
#1
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
Dish TV installation
Greetings all! A little help from my friends..
New pathway 2 from dish with two receivers...Greyhawk 31fk televisions in center of rig and brdroom...ran coaxle from dish to outside coaxle port in storage bay.then coaxle from Port behind tv to set top than HDMI from set top to TV...no luck with or without little green light on swith plate on or off...ugh
|
|
|
09-27-2014, 05:47 PM
|
#2
|
Lost in the Woods
Join Date: Jun 2014
Location: Woodstock
Posts: 1,128
|
which port behind TV. Is there only the one?
I don't know how MH's are done but on my trailer the port with the green light is for the roof antenna not the outside cable inlet.
|
|
|
09-27-2014, 06:08 PM
|
#3
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
Aux/sat the other one says tv and has a coaxle screwed on I was thinking that runs to the bedroom tv
|
|
|
09-27-2014, 06:12 PM
|
#4
|
Lost in the Woods
Join Date: Jun 2014
Location: Woodstock
Posts: 1,128
|
isn't there 2 in the storage bay. Sat and cable
I assume if there is you are screwed into the sat coax input
|
|
|
09-27-2014, 06:43 PM
|
#5
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
Only one in outside storage marked 75ohm
|
|
|
09-27-2014, 07:00 PM
|
#6
|
Lost in the Woods
Join Date: Jun 2014
Location: Woodstock
Posts: 1,128
|
I would just screw into each of them you see there and do trial and error..
the great thing about coax connections is you can not hurt anything by hooking up to the wrong thing.
What are you getting on the TV screen?
I assume your input on your TV is set correctly
looking at google hits for the greyhawk shows them saying there are 2 cable connections in the storage bay....maybe stuff was changed throughout the years
|
|
|
09-27-2014, 07:46 PM
|
#7
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
2014 Greyhawk, I get a Dish message indicating complete signal loss..which is weird because I'm connected well enough to get a Dish error message
|
|
|
09-28-2014, 11:58 AM
|
#8
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
I will be contacting a satellite installation specialist and will let you all know how it goes
|
|
|
09-28-2014, 12:39 PM
|
#9
|
Senior Member
Join Date: Apr 2011
Location: Southeast, NY
Posts: 1,113
|
Can you take pictures of your connections? I don't have a Greyhawk so trying to visualize it.
__________________
Karl - Southeast, NY
2020 377 RLBH
2018 Ram 3500 Mega Limited 6.7L Cummins w/ Aisin
|
|
|
09-28-2014, 03:43 PM
|
#10
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
I can shortly..thanks..basically plate in storage has one coaxle port marked 75ohm..plate behind set has two, one marked tv with a cable attached(looks to be going to rear tv) and the other marked aux/sat
|
|
|
09-28-2014, 04:00 PM
|
#11
|
Senior Member
Join Date: Aug 2014
Location: Spicewood, Texas
Posts: 913
|
Someone correct me but I believe if you want to feed a second tv on the dish you have to use a specific dish network diplexer.?? I bought one off eBay for my bedroom but both TVs are on same Channel. Controled by 211 box in living area.
__________________
2015 338RETS Eagle Premier gloss sides., king.
2012 Ram 3500, crew cab 4x4 duelly Deleted
16k miles, 530HP, 1000 +torque.
|
|
|
09-28-2014, 04:42 PM
|
#12
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
I'm unable to get one to work starting on the port in the storage bay
|
|
|
09-28-2014, 04:50 PM
|
#13
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
How do I get my 211 to work in the living area accessing the only coaxle plate in the outside storage bay marked 75ohm..thanks mark
|
|
|
09-28-2014, 05:04 PM
|
#14
|
Senior Member
Join Date: Aug 2014
Location: Spicewood, Texas
Posts: 913
|
I had so much trouble with my tailgator I just ran the coaxial thru the rubber in he slide out stright to 211 box, split it and run a coaxial to the rear.
__________________
2015 338RETS Eagle Premier gloss sides., king.
2012 Ram 3500, crew cab 4x4 duelly Deleted
16k miles, 530HP, 1000 +torque.
|
|
|
09-28-2014, 05:14 PM
|
#15
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
That's what I thought...I'm going to look to custom with a fellow on home advisors.com..it bothers me that on new rig it's not easier to accomplish this..perhaps the installation professional will have some insight
|
|
|
09-28-2014, 05:18 PM
|
#16
|
Lost in the Woods
Join Date: Jun 2014
Location: Woodstock
Posts: 1,128
|
Quote:
Originally Posted by thecampingcat
I can shortly..thanks..basically plate in storage has one coaxle port marked 75ohm..plate behind set has two, one marked tv with a cable attached(looks to be going to rear tv) and the other marked aux/sat
|
did you unscrew the cable marked Tv(looks to be going to rear tv) and hook the dish receiver there?
|
|
|
09-28-2014, 06:29 PM
|
#17
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,101
|
Are you using a splitter or running 2 wires? As Texashighsheriff said it has to be sat specific. Also the wire needs to be RG6
__________________
DISNEY LOVERS
|
|
|
09-28-2014, 06:39 PM
|
#18
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
Yes...same result..with little green line and off...and rebooting the box each time
|
|
|
09-28-2014, 07:06 PM
|
#19
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
Right now just trying to get one set to operate starting from outside the rig..and I'm using the cable they provided..actually I am using a cable I purchased at home depot to go to receiver from wall it is 75ohm not sure if it's rg6
|
|
|
09-29-2014, 07:46 PM
|
#20
|
Senior Member
Join Date: Aug 2014
Location: Ringwood
Posts: 280
|
OK..Padrig the satellite tech who came on a days notice was terrific! First I was trying to input in the out put for the patio tv... Found the correct coaxle in electric access door..bonehead thread candidate.. glad hour came though because he snaked power cord installed did player and synced bedroom tv..long story short custom install plus some tips on how best to secure a signal in some tree cover...the 31FK's wired nicely for satellite as it turns out and remote even works through flip down door with glass panel without opening it..couldnt be happier! Thanks to all of my Jayco friends as well...turns out as my Father says.."Its easy when you know how!)
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|