Jayco 1206 Popup Power lift Inoperative

[Johnnykick]

Working on a Jayco 1206 and power lift does not operate. In the power lift access door I see several relays and one fuse which is good. I get no sound at all. Not having a schematic of the wiring is making this a challenge. The motor is a KLAUBER model K01244R100. There are 2 wires connected the motor, a red and black. I was thinking of connecting them directly to the battery and see if the motor works. Thoughts anyone?

[Colorado]

I’m going to assume here that the lift gets its power from the camper batteries. Start there with a multimeter (voltage?), Disconnect the batteries and either try a jump box or a different battery. You should hear the relays click, did you check the fuse with a non LED TEST LIGHT? If you work your way back to the batteries and nothing then try supplying power directly to the motor.