Kitchen faucet suddenly stopped working

[estesbubba]

So I was dewinterizing this evening and when I opened the kitchen faucet on hot it sputtered off and on like it usually does after the water heater was empty before filling. It would spit and squirt then suddenly nothing. I opened the cold and nothing either. Went into the bathroom and both faucets for the sink and shower worked fine and so did the toilet. Outside shower worked fine also and back inside and nothing from either side of kitchen. I switched to city water and same problem. Looked under sink and no leaks or visible problems.

Any ideas on what could be the problem or what to do? Here is a picture of my faucet not that it probably helps.

[Sundancer330]

Sounds like you sucked up some junk and plugged up the aerator on the end of the faucet, unscrew it and pull it apart and flush the junk out.

[estesbubba]

Originally Posted by Sundancer330

Sounds like you sucked up some junk and plugged up the aerator on the end of the faucet, unscrew it and pull it apart and flush the junk out.

Well I had did that before I posted and it was fine. Then I went back out there looked at it again and noticed that I could unscrew the whole nozzle. Like a smart person I turned off the pump but like a dummy forget to depressurize the system 🤬



Good news is I found another screen which was blocked!