Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 02-20-2016, 10:30 PM   #1
Senior Member
 
Join Date: Nov 2015
Location: El Paso
Posts: 102
Lippert clear code?

Alright, I have used this self leveling Lippert 3.0 at least 15 times since I got the trailer. I have been very happy with it.....so far. Yesterday we got back home and parked in the normal spot and began the self level. I got the error-LF. Then it advises to retract all the jacks. Did that. Checked all the connectors for the left front jack but the error won't clear. Manual mode still works. Is there a way to "reset" or clear the error?
__________________

__________________
2016 Jayco Pinnacle 38FLSA
2015 Ford F-350 DRW FX4 Crew Cab
DesertJayco is offline   Reply With Quote
Old 02-21-2016, 07:05 AM   #2
Senior Member
 
Grumpy's Avatar
 
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 5,037
I think some mentioned unplugging the power cord to the controller will do it.
__________________

__________________
DISNEY LOVERS
PINNACLE 2015 38FLSA. aka: "Roam Sweet Home"
Grumpy is offline   Reply With Quote
Old 02-21-2016, 07:38 AM   #3
Senior Member
 
nhfire152's Avatar
 
Join Date: Jun 2015
Location: Whitesboro, NY
Posts: 140
I've had this happen also. You can actually download the Lippert App onto a smartphone. It contains owners manuals for their products including the 3.0.

I don't remember the reset process myself.

Good luck!
__________________
2015 Chevy Silverado 2500HD Crew - Duramax
2016 Jayco North Point 375BHFS
nhfire152 is offline   Reply With Quote
Old 02-21-2016, 08:40 AM   #4
Senior Member
 
Join Date: Nov 2015
Location: El Paso
Posts: 102
Quote:
Originally Posted by Grumpy View Post
I think some mentioned unplugging the power cord to the controller will do it.
Tried this. only pulled it out then reconnected. Maybe I didn't leave it disconnected long enough. Thank you. I will try again
__________________
2016 Jayco Pinnacle 38FLSA
2015 Ford F-350 DRW FX4 Crew Cab
DesertJayco is offline   Reply With Quote
Old 02-21-2016, 08:43 AM   #5
Senior Member
 
robkelly's Avatar
 
Join Date: Nov 2013
Location: Duxbury
Posts: 4,515
From the Ground Control 3.0 Manual:
1. Correct or otherwise repair the issue
2. Extend all of the jacks at least six (6) inches, then press and hold the "RETRACT" button on the touch pad until the jacks begin retracting
3. All of the jacks will retract fully to clear the error

I found the manual on-line and now have it accessible on my iPhone/iPad just in case...
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2018 Pinnacle 36KPTS
2017 RAM 3500 SRW CTD/AISIN CC LB
robkelly is offline   Reply With Quote
Old 02-21-2016, 08:47 AM   #6
Senior Member
 
Join Date: Nov 2015
Location: El Paso
Posts: 102
Quote:
Originally Posted by nhfire152 View Post
I've had this happen also. You can actually download the Lippert App onto a smartphone. It contains owners manuals for their products including the 3.0.

I don't remember the reset process myself.

Good luck!
Thanks. I did download the app "myLCI". Read through it and only remember it saying raise the jacks 6 inches then retract. Didn't wok. Then again I was a bit frustrated and cursing "all technology of the world" at the time and may have missed it. yes I realize the irony that I am using an iPad right now I was hoping someone remembered a simple 'push this then that' sequence.
__________________
2016 Jayco Pinnacle 38FLSA
2015 Ford F-350 DRW FX4 Crew Cab
DesertJayco is offline   Reply With Quote
Old 02-22-2016, 02:33 PM   #7
Senior Member
 
nhfire152's Avatar
 
Join Date: Jun 2015
Location: Whitesboro, NY
Posts: 140
I believe after everything is retracted, you need to bring the nose up so its above the level point. Then hit "Auto Level" and it should be good to go from there.
__________________
2015 Chevy Silverado 2500HD Crew - Duramax
2016 Jayco North Point 375BHFS
nhfire152 is offline   Reply With Quote
Old 02-24-2016, 05:23 PM   #8
Senior Member
 
Join Date: Nov 2015
Location: El Paso
Posts: 102
Quote:
Originally Posted by nhfire152 View Post
I believe after everything is retracted, you need to bring the nose up so its above the level point. Then hit "Auto Level" and it should be good to go from there.
Thank you. I will try this next.
__________________
2016 Jayco Pinnacle 38FLSA
2015 Ford F-350 DRW FX4 Crew Cab
DesertJayco is offline   Reply With Quote
Old 02-26-2016, 10:57 AM   #9
Senior Member
 
Join Date: Nov 2015
Location: El Paso
Posts: 102
Nothing was working so I emailed Lippert and they responded back to me pretty dog gone quickly. Looks like we all had a piece of the process. I have pasted in the relevant part of the email I received down below should you need it. It worked the first time for me. It was cool watching this rig go through the 're-home' procedure.


Ensure that you have 4-5 drop pin holes exposed on the front jacks. You will not be able to successfully perform this procedure if you have more holes showing.


***Before performing this procedure ensure that there is nothing that the coach will come in contact with.


With the error on the screen press and hold the FRONT arrow and extend the front jacks an additional 6-8 inches. Then press and hold the REAR arrow and extend the rears 6-8 inches. If you have a 6 jack leveling system to extend the middles you have to press and hold the RIGHT and LEFT arrows at the SAME TIME to extend the middle jacks 6-8 inches.


Once ALL the jacks have been extended a 6-8 inches press and hold the RETRACT button until all the jacks start to retract on their own. Once all the jacks start to retract on their own let go of the retract button and let the coach finish retracting on its own. Once you have performed this procedure correctly it should clear the error code.


At that time manually


lift the front legs to about truck height and press auto level.


If the error continues you may need to take the unit in for service.

__________________
2016 Jayco Pinnacle 38FLSA
2015 Ford F-350 DRW FX4 Crew Cab
DesertJayco is offline   Reply With Quote
Old 02-26-2016, 11:00 AM   #10
Senior Member
 
robkelly's Avatar
 
Join Date: Nov 2013
Location: Duxbury
Posts: 4,515
Thanks for the update! Hopefully I'll never have to refer back to this, but you never know.
__________________

__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2018 Pinnacle 36KPTS
2017 RAM 3500 SRW CTD/AISIN CC LB
robkelly is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 03:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.