Pocket Door Adjustment?

[RVhiker]

The sliding pocket door in my 2011 28.5RLS no longer hangs straight. Does anyone know how to adjust the door hardware so it will hang straight?

[chipper]

Don't hold me to it, but I think the wooden valances (track covering) has to be removed for adjustment.

[Doug]

Yep,
Probably much like bypass closet doors, rollers/track at the top.
Brackets should be slotted to raise or lower as needed.

[RVhiker]

I found out more about my pocket door. The hardware for mine is by Johnsonhardare.com. The door can (I think) be easily lowered and then adjusted to hang straight. There is a white nylon catch that goes around a post that locks the door to each roller carriage. The nylon catch can be rotated slightly with a screwdriver, then the door lowered and the door "pegs" adjusted, and then re-attached to the roller carriages. Here is a diagram of the hardware I think is in my trailer. By the time I found the diagram, I had already put the trailer back into storage so I can't say for sure, but it sure looks like what my door hardware looked like.

[Ry-guy]

The pocket doors that I have seen sometimes have a nut on the door hangers that can be turned to adjust, to change the angle of the door. You may have to remove a piece of trim to get at them. Ryan

[Seann45]

Make sure the trailer is level first... Mine appears out of alignment if my trailer is not level.. soon as I redo the level it is fine..

[earlyretirement]

I just picked up my Whitehawk 25BHS a few weeks ago and one of the doors already came off it's track and I wasn't able to easily fix it myself. One of the things on the list for Richardson's RV to fix here in a few weeks.