Power shortage

[gman03842]

Just had something weird happen.Was running the TV, Fireplace, small space heater, and lights. Windy here near Myrtle Beach with a little rain. All of a sudden we lost power on everything in the Jayco North Point except 12 volt lights, and Fridge swapped over to 12 volt and LP.

Checked the breakers inside and nothing tripped, went outside and had power at the post and the Progressive EMS was showing 122, and 123 on the legs with no errors. After about 5 minutes the power came back on.

Any ideas?

[Cannon]

My progressive ems has a 2 or 3 min delay. Probably lost outside power but by the time you went outside it was back on and took a couple min for ems to reset.

[gman03842]

Thanks, I was wondering about whether the EMS would take a little time to reset

[RedHorse1]

Originally Posted by gman03842

Just had something weird happen.Was running the TV, Fireplace, small space heater, and lights. Windy here near Myrtle Beach with a little rain. All of a sudden we lost power on everything in the Jayco North Point except 12 volt lights, and Fridge swapped over to 12 volt and LP.

Checked the breakers inside and nothing tripped, went outside and had power at the post and the Progressive EMS was showing 122, and 123 on the legs with no errors. After about 5 minutes the power came back on.

Any ideas?

My PI EMS will save a “Previous Error” code (PE), I seem to recall seeing one reporting a power fail.

UPdate: looked at my manual and it may not store a power fail code. But the power-on delay could certainly be the answer. MY manual says there are 2 delay settings, 15 seconds and about 2 minutes. Selectable by a jumper in the EMS with 15 sec being the factory setting.