Removed Range hood now sensors don't work

[Alliecaet]

Today I removed the range hood/exhaust fan. The stove is out so I don't need the hood. I just cut the wires, taped them up and put them back in the wall. Now my tank sensors and pump button do not work. No lights at all and pump will not turn on. The fuse is fine and no wires are touching each other. Everything worked fine until I did this.

I guess I did something wrong. Do I need to connect the green wires together or the white wires together or both sets?

2010 Jayco Jayflight 22 FB

Help please! Thanks!!

[bedrck46]

check your fuses to see if any blew Use a meter to check the fuse
Looks don't tell the true condition of fuses

[mike837go]

The thin white wires are ground and should be connected together. The thin black wires are +12vdc and should be connected together.

If you have 2 or more of other colors connect them together too.

You did goof by cutting all the wires before figuring out what the downstream uses were.

[Alliecaet]

Ok Mike,
thanks! Going to try that right now.

[Alliecaet]

IT WORKED!! Thanks so much. Next is replacing the radio cd player with the new smaller radio cd player!!