Satellite wiring solved
I finally figured out my satellite wiring on my 315 and thought I would share.
We have a dish receiver in the living room and I wanted to watch satellite on all the TV's, realizing it would have to be the same channel on all three TV's. I disconnected the TV wire in the cabinet above the living room TV and use that connection to run satellite to all TV's. I connected an RF modulator to the receiver (sat. out) with a rg6 coax and then connected the RF modulator to the TV connection with another rg6 coax. I get a perfect picture on all three with this set up. I had a couple satellite IR cones from a previous satellite system and use that to change channels on the bedroom television when we are in there. Hope this helps someone out!
|