Shore Power Cord Replacement
I want to replace the "disappearing" power cable with a Marinco shore power inlet so I can use my Marinco Power cord, which is better quality and easier to handle when it's cold, as the marico version can be disconnected and rolled up. Is the existing cover plate screwed into some kind of backing materialor te paneling on the inside, or is it held on by just sheet metal screws into the skin and the sealant/putty. It's located directly behind the fridge, so I'm wondering if they just screwed all the way through since it wouldn't be visible. The skin around the existing cover apperas to be a little distorted so I'm thnking there's something solid behind it that it was snugged up to.
|