Does anyone have difficulty opening and closing the horizontal slide windows in your TT? If so is there something on the market that allows them to slide much easier?
Make sure you clean them really well. A lot of times they get dust in the tracks and it makes them hard to open. I had one that was a little more difficult and I put a small amount of graphite in the track and it helped as well. I would not recommend using any type of oil as it will end up attracting more dirt.
I used a little spray silicon on the tracks, then slid the windows open and closed while the silicon was still wet to spread it evenly. It solved the problem of the windows sticking.
__________________
There's lots of advice and information in forums... sometimes it is correct. For example, all of my posts are made by a political appointee who got the job as a reward for contributions to my diesel bill.
I have a number of windows in my 27RLS that are difficult to open even after I lube them with the 3:1 window lube. It's like the tracks are too tight from the manufacturer. I would love an idea to physically expand the tracks, any ideas?
I use canned air to blow the tracks and get any dirt or dust out. Then 3-in-One window lube. It isn’t perfect but it helps.
__________________
2018 JayFlight SLX 212QBW
1999 Ford F-250 Super Duty Lariat SC, 7.3L PSD, 3.73
Transfer Flow 50 gal aux; Andersen WDH; Prodigy P2
😁 "If a man says he’ll fix something, he will. There’s no need to remind him every 6 months.
Linear Mode
