Have newer jay flight Slx model bought may 2018 have had issue with water heater module had it replaced 4 times last season on first run this year it ,i presumed it fail again no hot water its an Atwood 6 gallon it is gas only when you turn on gas will come but no spark i can light it with a striker and it will burn for 5 seconds than quit 2 amp fuse in module is good comments
Check the burner tube, insects like to build nests in there and that can cause flame problems. Insect screens should be on the WH, furnace and fridge vents IMHO.
__________________
Cheers,
T_
2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
That seems odd replacing the WH board 4 times. If replacing with the dinosaur-board (reputable) you do it once. There might be other issues like wiring connections. If a none competent mechanic works on them and doesn't test the whole procedure then I wonder.
Replacing on board is easy but is not always the solution.
__________________
2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-7000 lbs.
Dexter Axle Lift 4-9/16" - installed with sub-frame.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power
Been to dealerships twice for same issue and sent mobile tech once Dealers has been in business for 20 plus years I am wondering if product issue last trailer had 12 years only had to put a heater element fy electical side
Dealer replaced (3) boards in mine and Atwood sent me another (which failed) replaced with a dinosaur-board and it works flawlessly for over a year now.
__________________
2017 Jayco Hummingbird 17RK
2015 Ford F150
I have read that there has been a high failure rate with the Atwood boards that were made in China. The newer boards seem to be working better. Many owners have been replacing with Dinosaur boards, as mentioned above.
__________________
2018 Jayco Jay Flight 21QB
2012 F150 Ecoboost Crewcab
Amateur Radio K3EXU
Moderator on Hi-Lo Trailer Forum
Literally about 5 minutes from finishing swapping in a Dinosaur UIB-64 in my 2019.
It wouldn't ignite, so the gas would come on for about 3 seconds and shut off.
I didn't want to play the games with Atwood or my 2 year warranty so I just bought the UIB from Amazon. Works great. Takes less than 5 minutes to install it.
Took the camper out for my first trip with the water heater. Camping in a driveway for the county fair so I have limited AC power plugging in to a 20 Amp outlet.
The new Dinosaur board works great. Igniter sounds more aggressive? than the Atwood unit. Otherwise, it just works like it should. If it lasts for 3 more trips it will be as good as the original Atwood
Water heater
Linear Mode
