One thing to look at is that all air is removed from the line. Also the gas electrical switch is used as reset switch. Sometimes you have to reset a couple of times in order to remove all air. When there is no ignition the circuit board might be at fault. In any case follow the schematic and trouble shooting on your particular model as stated in the Atwood Water Heater manual.
__________________
2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-7000 lbs.
Dexter Axle Lift 4-9/16" - installed with sub-frame.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power
|