|
|
05-26-2018, 01:06 PM
|
#21
|
Senior Member
Join Date: Oct 2016
Location: Lower Alabama
Posts: 1,482
|
We keep two 10’ sections in the rear bumper and the 90 degree elbows in a covered plastic tub in the basement.
__________________
2018 Jayco Eagle HT 28.5 RSTS
2017 Ford F-250 Lariat FX4, 6.2L, 4.30 gears
|
|
|
06-02-2018, 08:36 PM
|
#23
|
Member
Join Date: Apr 2015
Location: Paige
Posts: 36
|
Bumper is a great storage place
I store 2 - 10 ft lengths in my bumper and the 90 fits just fine but snug. Since I have trouble getting the cap off at times I have a short string looped over the 90 and run through the hole in the cap. This allows me to tug on the string loop pulling the cap off and pulling the hose out.
|
|
|
06-02-2018, 10:30 PM
|
#24
|
Senior Member
Join Date: Jun 2016
Location: Mechanicsville
Posts: 1,479
|
Store it, plus a 10' extension, in a 35 gal Sterilite tub which I store in the large curb side exterior storage compartment. Before I got this 23RB, I used to keep it in the bed of the pickup.
I keep all other equipment I need, or may need, in the same tub.
__________________
Erroll and Mary Doss and Duffy (RIP)
2018 Jayco Redhawk 22J
2014 F150 SC, 4x4, HD Pkg, Sterling Gray
|
|
|
06-03-2018, 04:00 AM
|
#25
|
Senior Member
Join Date: Dec 2009
Location: Maplesville - Home Base
Posts: 3,059
|
Mine is used 24/7/365 so storage isn't a concern. When I move campgrounds I just lay the hose/fittings in the bed of my truck. A good airing out doesn't hurt a thing IMHO.
__________________
Ed
KM4STL
2006 GMC 2500HD CCSB 4x4 Duramax/Allison, Titan 52 gallon fuel tank, Prodigy Controller, B&W Companion Hitch
2010 Jayco Designer 35RLTS, Cummins/Onan RV QG 5500 EVAP, Progressive Industries EMS-PT50X, TST Systems 507 TPMS, RV Flex Armor Roof
|
|
|
06-12-2018, 12:42 PM
|
#26
|
Senior Member
Join Date: Mar 2015
Location: Garden City
Posts: 151
|
was storing in bumper
but on of those crappy end caps popped off...didn't lose the hose thankfully but need new end cap or a different storage spot
even in tubs I don't like storing poop tubes in my camper bin
__________________
2015 JAYCO JAYFLIGHT LSX 267BHSW
2017 CHEVY SILVERADO 5.4 L V8 ECOTECS
|
|
|
06-12-2018, 02:01 PM
|
#27
|
Senior Member
Join Date: Dec 2012
Location: Southern Indiana
Posts: 3,209
|
I keep a RhinoFlex 15' & 5' extension in the bumper. To keep the bumper caps from going bye-bye I drilled 2 small holes top & bottom and use a stainless steel spring to hold them on. As you can see I used to tape them down.
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
|
|
|
06-12-2018, 02:13 PM
|
#28
|
Senior Member
Join Date: Nov 2016
Location: SC
Posts: 251
|
Rear bumper. Goes straight from there to the hookup and back. It's always there and ready when needed. I've thought about the cap coming off but mine are still very snug. If they get noticeably looser, I'll install a tether from the bumper to the cap to prevent losing it.
shrp
__________________
"What if you woke up today with only the things you thanked God for yesterday?"
2017 Jayco Jay Flight 28BHBE
2011 Chevrolet Silverado 2500HD 6.6 Duramax/Allison Transmission
|
|
|
06-12-2018, 02:51 PM
|
#29
|
Senior Member
Join Date: Oct 2014
Location: Bethlehem
Posts: 277
|
We lost a cap a couple of trips ago. I got the Camco pinch ones and they're noticeably better...they're almost difficult to remove.
Accessories (orange adapter and clear elbow) go in a bag in a clear bin.
Some day we'll do the fence post mod.
__________________
2016 Jay Flight SLX 287BHSW
2018 Silverado 2500
|
|
|
06-12-2018, 05:13 PM
|
#30
|
Senior Member
Join Date: May 2016
Location: Cincinnati
Posts: 719
|
Small one with two different elbows are stored in the side sewer compartment. Installed long tube under the body for 2 longer hoses. Once we needed close to 85' of hose. We also have a container for the two slinky items we have.
__________________
Dennis & Donna Dohme
2016 36FBTS Pinnacle
2008 F450
USMC Veterans (both of us)
|
|
|
06-17-2018, 08:26 PM
|
#31
|
Senior Member
Join Date: Oct 2017
Location: Calgary
Posts: 458
|
Well, everyone was right, the Rhino Extreme hose I bought does fit int eh bumper just fine. made the mistake of jamming the clear elbow in too, which made getting it out a pain. Had to ram a 2x4 in from the other end to get that out. Will keep the clear elbow and other adapters in a spot in my storage area, right beside the rubber gloves I wear for dirty jobs.
|
|
|
06-17-2018, 09:05 PM
|
#32
|
Senior Member
Join Date: May 2017
Location: Hood River
Posts: 170
|
We have endcaps on our hoses. Rinse them with water after dumping, then collapse them and cap them. Then they go in a nylon bag (from Camping World).
__________________
2017 RAM 2500 Tradesman CTD CC LB
2017 Jayco Jayflight 28BHBE
Equal-i-zer 1200# WDH
Prior 2011 Jayco Greyhawk 26DS
|
|
|
06-17-2018, 09:22 PM
|
#33
|
Junior Member
Join Date: Jun 2018
Location: Coeur d'Alene
Posts: 18
|
I have a snap-shut tote that I store the sewer hose, parts for it and the leveling ramp. Inside it doe start to get a bit musty. I often hit it with some Lysol in between sites.
__________________
Chris Savage
2018 Chevy Silverado 1500 Crew Cab LTZ towing a Jayco Jay Flight SLX 212QBW Travel Trailer
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|