'12 X19H & Equalizer WDH or ??

[MIFL19H]

I have recently upgraded my TV to a 2007 Expedition EL and am now researching WDH's for my '12 X19H. After my research I was set on getting an Equalizer WDH 600/6000lb or 1000/10,000lb for potentially the next trailer, I was reading the Specs and Installation guide and came across the location for the Sway Bar brackets, 32" from centerline of the coupler. Of course 32" is exactly where the Propane Tank bracket bolts to the frame and anything short of that is there the bracket is angled along the frame. On one side I figured I could make it work, on the opposite side all the wiring for the Trailer and Battery runs along the inside exterior of the frame, not in the frame, this would of course impeded clamping the brackets without re running all the wiring. I also read about the need for either a spacer or special brackets for the NORCO 4 3/8" Frame...

For those that have Jayco Ultralights and have the Equalizer WDH... how have you overcome these issues ?

What other WDH's would be of recommendation for the X19H and it's smaller frame and location of all the equipment up front ?

Thank You ahead of time...

-Mike