Fastway E2 vs Equalizer?

[need-a-vacation]

Originally Posted by lukenick1

Thank you......called Etrailer back again and got someone competent. She suggested the Reese Straight Line with Cam buckles. After looking at that system I am not so sure it will work with my clearance issue (underslung coupler).

The Dual Cam is an awesome system, but you will probably still have the clearance issues as you fear.

I will suggest either the Equal-I-Zer 4 way system, or the Reese SC. The Reese does offer replaceable pads where the bars ride. The Reese hitch head also offers more fine tuning adjustment than the Equal-I-Zer hitch head. Either system will work very well.

[oldmanAZ]

Originally Posted by Coldfusion

I have the e2 and it's awesome so far
...snip

Thank you.

Would you also share the trailer you pull and the vehicle you pull it with? Folks trying to decide on hitches would find that information helpful, too.

[Coldfusion]

Originally Posted by oldmanAZ

Thank you.



Would you also share the trailer you pull and the vehicle you pull it with? Folks trying to decide on hitches would find that information helpful, too.

Trailer is a 2016 Jayco Jay Flight 264BHW...dry weight 4700 lbs...29 ft total...truck is a 2016 Ram 1500 SLT Crew Cab 4x4...8 speed...3.21 rear...5.7

[ecoboosteagle]

Not even close...i had the e2 first and pulled it a 1000kms or so. Lots of sway in cross winds. Upgrades to the E4 and night day, no sway at all. Well worth the extra money. If you are pulling a trailer over 30' don't waste your time get the equal-I-zer 4 point!