|
|
10-21-2016, 07:02 PM
|
#1121
|
Senior Member
Join Date: Sep 2015
Location: Sandia Park
Posts: 479
|
Threw some LEDS on to replace the halogens.
Sent from my iPhone using Tapatalk
__________________
2015.5 Duramax
USMC Vet Operation Iraqi Freedom
|
|
|
10-21-2016, 10:06 PM
|
#1122
|
Senior Member
Join Date: Jan 2014
Location: Los Lunas, New Mexico
Posts: 3,766
|
Gassed it up, checked all fluid levels, tire pressures, battery, etc. Then filled the long bed up to the gilligans with camping stuff to get ready to leave Sunday for a week at Fool Hollow Lake, AZ.
Happy RVing,
Jeff
__________________
2018 Eagle HT 26.5 RLDS. SOLD
2009 F150 Supercab UNICORN, 5.4L ,3.73, HD and Max Tow Packages, Timbrens, Bilstein shocks.
Wet bolt kit. Andersen Ultimate 20K hitch. TST 507RV TPMS. Hydro Life HL-200. 16" Goodyear Endurance. Progressive EMS. SteadyFast Stabilizers. Furion backup camera.
Best friend wife, Di, and dog Cooper. RETIRED
|
|
|
10-24-2016, 01:32 PM
|
#1123
|
Senior Member
Join Date: Jun 2016
Location: Kennesaw
Posts: 172
|
Installed a Traxion 5-100 Tailgate Ladder.
Super glad I did too. I'm getting to old and stiff to be trying to climb up that tailgate!
|
|
|
10-28-2016, 08:43 AM
|
#1124
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
Picked up a new grease gun, needle tip, and grease so I can grease my front axle drive shaft. Apparently on RAM trucks, it is to be done at each oil change interval. I just saw the notice in the manual and under the hood last time I changed the oil (which was only the second time ever for the truck), so I figured I better follow the instructions and get it done. Also picked up new wiper blades and washer fluid. Once that's all done, we should be GTG (at least insofar as the truck is concerned) for our long trip coming up!
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
10-28-2016, 09:48 AM
|
#1125
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by Camper_bob
Picked up a new grease gun, needle tip, and grease so I can grease my front axle drive shaft. Apparently on RAM trucks, it is to be done at each oil change interval. I just saw the notice in the manual and under the hood last time I changed the oil (which was only the second time ever for the truck), so I figured I better follow the instructions and get it done. Also picked up new wiper blades and washer fluid. Once that's all done, we should be GTG (at least insofar as the truck is concerned) for our long trip coming up!
|
Bob, there's a youtube video that shows you exactly how to complete the greasing of the front axle drive shaft. It's not difficult.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
10-28-2016, 10:27 AM
|
#1126
|
Senior Member
Join Date: Feb 2015
Location: Eagle River, AK
Posts: 900
|
Not today, but tomorrow, will be replacing front U-Joints on my Dodge. Drivers side is bad, but I believe in the old train of thought that if you change one, you should change both.
I will look at the ball joints as long as I'm in there and possibly replace those.
Sent from my iPhone using Tapatalk
__________________
We are just a humble drinking couple with a hunting and camping problem.
2018 Jayco Octane 260
2019 Dodge Ram 2500, 6.4 Hemi, 8 spd A/T
2021 Argo Aurora 8x8/2008 Arctic Cat M1000 SnoPro
Previous: Komfort 5er/Jamboree MH/Lance Cabover/Jayco Whitehawk 25BHS TT
|
|
|
10-31-2016, 07:45 AM
|
#1127
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
Quote:
Originally Posted by Bookemdanno
Bob, there's a youtube video that shows you exactly how to complete the greasing of the front axle drive shaft. It's not difficult.
|
Found the video a while back, but couldn't find the "spot" until I was ready to do it. I got down there yesterday and found that there is in fact a fitting there, it's just not a "zerk" fitting. The worst part of the job was that I had to get out from under the truck at the end of the driveway and drag my air hose all the way out there so I could blow the dirt out of the way (I didn't want to pump sand up in there ahead of the grease). Once it was clear of debris, it was plain as day. I stuck the needle on the fitting and pumped until grease came out. Easy peesy.
I also changed the wiper blades and hauled a load to the dump. The truck is completely ready for our trip, I just have to load it up! Well, I should also clean the inside of the windshield, but that shouldn't take long.
DW took it to the car wash for me on Friday, so it's all nice and clean!
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
10-31-2016, 08:58 AM
|
#1128
|
Senior Member
Join Date: Feb 2015
Location: Eagle River, AK
Posts: 900
|
What did you do to your Tow Vehicle today?
Quote:
Originally Posted by NVGun40
Not today, but tomorrow, will be replacing front U-Joints on my Dodge. Drivers side is bad, but I believe in the old train of thought that if you change one, you should change both.
I will look at the ball joints as long as I'm in there and possibly replace those.
Sent from my iPhone using Tapatalk
|
Nothing ever goes easy. Luckily the ball joints were all good, however, the passenger side wheel bearing was going bad and as it turns out, it was goo I was replacing the both U-joints anyway as the passenger side one was bad as well. Serious pain in the a getting the old u joints out.
Luckily my DW is an intelligent lady who knows a little mechanicing as well. She was able to make the runs to the parts store to get me a new 18mm impact socket on one trip, the new wheel bearing and a 1 3/4" impact socket on another trip. She knew exactly what I was looking for and what it all looked like and what to ask for.
__________________
We are just a humble drinking couple with a hunting and camping problem.
2018 Jayco Octane 260
2019 Dodge Ram 2500, 6.4 Hemi, 8 spd A/T
2021 Argo Aurora 8x8/2008 Arctic Cat M1000 SnoPro
Previous: Komfort 5er/Jamboree MH/Lance Cabover/Jayco Whitehawk 25BHS TT
|
|
|
11-06-2016, 09:33 PM
|
#1129
|
Member
Join Date: Dec 2015
Location: Fresno
Posts: 45
|
Checked the fluids and took it to the car wash so it's ready to go Thursday for our trip to Pismo Beach.
|
|
|
11-07-2016, 06:32 AM
|
#1130
|
Senior Member
Join Date: Dec 2015
Location: Northern Nevada
Posts: 277
|
Today, taking it to the dealer for a recall of the master cylinder, ugh!! Need to get this done before the Thanksgiving trip to Valley of Fire state park near Vegas
__________________
2015 Jayco White Hawk 28dsbh
2014 Ford F150 4x4 w/Ecoboost
H/D tow package
2005 Forest River Rockwood 2601 (Sold)
2011 Ford Expedition XLT (Sold)
2008 Jeep Wrangler (Just for fun!)
|
|
|
11-07-2016, 08:34 AM
|
#1131
|
Senior Member
Join Date: Nov 2010
Location: Pahrump
Posts: 4,038
|
Had a man who does high end yachts spend over a day detailing Big Blackie. Don't dare drive it now!
__________________
'11 Eagle 320RLDS
'02 F350 PSD Dually 4WD
DW's Ride, '13 Expedition
'14 Denali XL
|
|
|
11-10-2016, 08:56 AM
|
#1132
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
Got it all back down to "daily driver" duty and unloaded after the long tow to/from Colorado.
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
11-10-2016, 09:48 AM
|
#1133
|
Senior Member
Join Date: Nov 2016
Location: SC
Posts: 251
|
Just purchased a tow vehicle to tow my new TT. Of course, the preliminary things must be done to get it usable for my needs.
Rhino-lining in bed, camlocker toolbox, off-road tires to start. Will put tow mirrors on it as soon as i find what I am looking for. I'll post the 1st pics once I pick it up after lunch.
__________________
"What if you woke up today with only the things you thanked God for yesterday?"
2017 Jayco Jay Flight 28BHBE
2011 Chevrolet Silverado 2500HD 6.6 Duramax/Allison Transmission
|
|
|
11-13-2016, 08:40 AM
|
#1134
|
Senior Member
Join Date: Mar 2013
Location: Kansas City
Posts: 1,712
|
Ordered all new brake lines (hard and flex ). I had known the 99-07 GM trucks had tons of complaints about rusted brake lines. After completing a repair on my ABS module I decided to replace my heavily rusted lines before they become a problem.
__________________
2018 28BHBE
2017 Ford F250 XLT, 6.2 gasser
2013 26BH (traded)
|
|
|
11-13-2016, 09:55 AM
|
#1135
|
Senior Member
Join Date: May 2016
Location: Milpitas
Posts: 1,628
|
Have a Chevy 2013 Express Customized Van 1500. The 1500 rear end would not pull the trailer I wanted. Looked at the 2500, same engine, same transmission. Found a 2500 rear end and had it installed. Hmmmm. While the rear end mechanic assured me that everything would fit, the stop bumpers didn't stop the axle from hitting the frame. Had to order new stop bumpers and have them installed.
|
|
|
11-13-2016, 03:12 PM
|
#1136
|
Senior Member
Join Date: Sep 2015
Location: Sandia Park
Posts: 479
|
PCV reroute
Oil changed (Amsoil)
Tires rotated
Fuel filter changed (12,000 miles)
Air filter cleaned and oiled
Busy day but was great to add to the longevity
Sent from my iPhone using Tapatalk
__________________
2015.5 Duramax
USMC Vet Operation Iraqi Freedom
|
|
|
11-13-2016, 04:52 PM
|
#1137
|
Senior Member
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
|
Oil Change, Tire Rotation, Gave her a bath, washed and gave her the pre-winter coat of wax. Tomorrow will be interior detail day...
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
|
|
|
11-13-2016, 05:14 PM
|
#1138
|
Senior Member
Join Date: Sep 2016
Location: Everett
Posts: 264
|
Didn't do it today but I added the Roadmaster Active Suspension last weekend and it works great! Lifted the truck about an 1" and I have about an 1 1/2" difference from the back to the front...no more sag and a solid ride towing. I had a nice ride with the factory suspension but a little sag and some bouncing on the expansion joints but with a test drive all but gone/reduced significantly.
Thanks to all the peoples suggestions to go with the RAS and save the $$ by not getting the air bags. The install only took about an 1 1/2 hours and most of the time was spent jacking it up, taking and putting the tires back on. Also thanks to Marcm157 who helped out with some good advice.
Journey on to safe travels.
__________________
2018 Outdoors RV 25RDS, 2016 F-350 Lariat, 3” lift, 35” tires, Pro Performance track bar, RAS Suspension, & Recurve R-3 WD hitch.
2016 Whitehawk 25BHS
2016 F-150 Lariat ecoboost
|
|
|
11-17-2016, 06:22 AM
|
#1139
|
Senior Member
Join Date: Nov 2016
Location: SC
Posts: 251
|
As promised...
DrtEMax,
Good looking rig. Do you mind if i reveal my ignorance and ask what the PCV reroute does? I am a new diesel owner. Thanks in advance.
Shop
__________________
"What if you woke up today with only the things you thanked God for yesterday?"
2017 Jayco Jay Flight 28BHBE
2011 Chevrolet Silverado 2500HD 6.6 Duramax/Allison Transmission
|
|
|
11-17-2016, 11:46 AM
|
#1140
|
Senior Member
Join Date: Feb 2012
Location: SE Wisconsin
Posts: 455
|
^^^ It keeps oil out of your intake system ^^^
__________________
1998 Jayco Eagle 302FK (Honda EU3000is)
2016 GMC Sierra Denali 3500HD 4x4 Duramax/Allison
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|