We recently bought a 2009 Jayco 23B. Does anyone know how to get everything to work on battery. All works fine when plugged into electrical but nothing works when not plugged in. I thought there was to be 12v supply. The manual does not help me out at all.
Battery on the tongue of the trailer. The plugs will only work when the unit is plugged in to 120v. Lights and all other 12v items require a battery to operate without 120v shore power.
As o2silverado said, lights, fridge on propane, furnace, water pump, and anything else 12v should work with just the battery hooked up. Check the fuse at the battery.
My '05 has a master switch for the lights at the entryway. Everything else works on battery power with no special switches. Like mleger11 said, sounds like a fuse.
Linear Mode
