Bed end seal

[Azbirddog]

Does anybody know where I can find seals for the
bed end doors for a 2009 Jayco Feather Export 17C hybrid.

[Jerzee]

I am also looking. I'll post here if I find anything

[TWP723]

Try www.jaycorvparts.com.

[rabalin]

Check your seals to see what you have. I found several on Ebay and Amazon. type in Auto Marine Rv weather stripping.

[DocBrown]

x2. The bed end seals are a generic item and can be replaced with anything on the market that's the same size and the same pliability.

[bankr63]

I would also check out Steele Rubber products https://rv.steelerubber.com/ for seal replacements. Made in USA from premium raw materials.

[Jayd976]

If anyone has any update on this that’d be great because I can’t find anything for my 09 17EXP

[joshscott84]

I used this on my X17Z. It's exactly 1-1 specs of the original Jayco part. Ordered 40' to do both bunk ends.

https://www.ebay.com/itm/172142095867

[2012x19h]

Originally Posted by joshscott84

I used this on my X17Z. It's exactly 1-1 specs of the original Jayco part. Ordered 40' to do both bunk ends.

https://www.ebay.com/itm/172142095867

The one in the ebay links looks different from what came with my trailer from the factory. The OEM seal on my trailer has two additional fins, and another air gap under the larger tube.
Here is the Jayco part number for the one on my x19h: 0700138.
You'll see pictures online when you google "0700138 Jayco".
Mine did an great job keeping water out for 8 years, so I'll replace it with the same.

[Jayd976]

0700138 Jayco that’s exactly what mine looks like on my 2009 17EX-Port.

[2012x19h]

The OEM seal from Jayco is also less expensive than the ebay seal (I was quoted $0.80 per foot for the Jayco seal vs. $0.99 for the one from ebay).
Need about 30 feet to do both ends on my 19H, but ordered a few extra .... :-)

[Jayd976]

Where did you order from? I’ve contacted jayco and all they say is you have to go to a local dealer.

[joshscott84]

Originally Posted by Jayd976

Where did you order from? I’ve contacted jayco and all they say is you have to go to a local dealer.

http://www.canvasreplacements.com/pr...roducts_id/473

$.50 per foot

[2012x19h]

Originally Posted by Jayd976

Where did you order from? I’ve contacted jayco and all they say is you have to go to a local dealer.

The link above seems to have it:
https://www.canvasreplacements.com/pr...roducts_id/473

Or you order from your dealer. In fact, any dealer should be able to get it for you. I think they can have the item shipped directly to you when they order it. There will be a shipping fee on top of the product cost, I think, but you know you'll get the "genuine Jayco" replacement. That's the route I went, I don't mind a few extra bucks for the piece of mind. I want to make sure the replacement is lasting as long as the original when it comes to preventing water intrusion.

[Jayd976]

Agreed