Front coupler set up

Meadows11 · 06-01-2021, 04:41 PM

How do I size this to order a new one?
This is a 2013 X23B...
Thank you!

Grumpy · 06-01-2021, 05:15 PM

The info should be stamped right on top in front of the jack.

Jagiven · 06-01-2021, 07:14 PM

As I recall, on top were all that writing is at, should have the coupler size. My just need to clean it up.

My 2012, uses a 2 5/16" coupler.

crockettlarry · 06-02-2021, 03:22 AM

Curious about the need to replace.

RAurand · 06-02-2021, 05:53 AM

Uhhhhh, NOT ALL are on top.
Mine is stamped underneath. I have to lay down on the ground and look up underneath.

Grumpy · 06-02-2021, 06:08 AM

Quote:

Originally Posted by RAurand

Uhhhhh, NOT ALL are on top.
Mine is stamped underneath. I have to lay down on the ground and look up underneath.

Some stampings visible in his picture though.

bankr63 · 06-02-2021, 10:40 AM

Looks to be an Atwood from the stamping at the top. Check their site (now a part of LCI) and you should be able to find the correct replacement. Is that a part number near the Atwood logo? If yes, a quick internet search should find the correct one.

Manuals for these are at https://support.lci1.com/atwood-couplers if you are looking to repair.

You may also like: