I need to take these out for a warranty replacement. I don't have any pictures handy, so I don't know what I'm up against.
Anyone have any tips on how to remove the furrion stereo and the ceiling lights? Any gotchas I need to be aware of? Or is it super straight forward and I am worrying about nothing!
not sure what rig you have but in my 2018 ht fifthwheel the light lens just spins off and then you see the screws. The stereo has a thin bezel around it that pops off for access to the screws
Was easy. The lens does indeed need to spin off. Took me a minute to figure that. Pulling on the bottom of the stereo nicely took off the plate to take out the stereo.
I should add that the light cover lens doesn't totally spin off. You spin it like 1/2" and then use a butter knife or something to pop it off. They kinda go on and off like smoke detectors in your home usually do.
Just for clarification for anyone that comes across this thread in the future.
I should add that the light cover lens doesn't totally spin off. You spin it like 1/2" and then use a butter knife or something to pop it off. They kinda go on and off like smoke detectors in your home usually do.
Just for clarification for anyone that comes across this thread in the future.
MOST of my lights are the quarter turn then pry out variety but I have 2 above my kitchen sink that fully unscrew.... Go figure.
Linear Mode
